Programming The Order Of Playback; Checking Or Changing Programmed Tracks - Samsung AH68-01145B Instruction Manual

Programming the Order of Playback

You can decide:
The order of the track desired to listen
The track not desired to listen
A maximum of up to 30 order of tracks desired to listen may
be programmed.
Before selecting the track, the CD player should be stopped.
This function may be used simultaneously with the CD Repeat
function.
1
If the CD function is selected, stop the player by pressing
2
Load the selected CDs.
3
Press Program.
Result: The following indications are displayed:
(01 = Program no., DI = Disc no., – – – = Track no. on the disc)
4
If necessary, select the disc containing the required track by pressing
the corresponding Disc (1, 2, 3) button.
5
Select the required track by turning the Multi Jog knob:
To the left to move back through the tracks
To the right to move forward through the tracks
6
Press Program to confirm your selection.
Result: The selection is stored and
played.
7
To select other tracks, repeat Steps 4 to 6.
8
Press VCD/CD ( ) to listen to the track selection in the order programmed.
9
To...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards one
or more tracks
10
To cancel the selection, press
Once if the compact disc player is stopped
Result: PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to the
next programmed track.
You can also use the
tracks in step 5, 9.
8
5,9
.
is dis-
Turn the Multi Jog knob...
One notch to the left
Two notches to the left
One notch to the right
The appropriate number of
notches to the right or to the left
.
/ buttons to select the required
4
3,6
1, 1 0
Checking or Changing Programmed
Tracks
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press Program.
Result: The following indications are displayed:
(C = Check, 01=Program No, DI = Disc No, – – – = Track No on the disc)
If you have already programmed 30 tracks, C is displayed
instead of P when you press Program.
3
Press Program again.
Result: The first track selected is displayed, together with the letter C (Change).
4
Press Program one or more times until the track to be changed is displayed.
5
If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
6
Press and or turn Multi Jog to select a different track.
7
Press Program to confirm your change.
8
Press VCD/CD ( ) to start listening to the selection.
Result: The first track selected is played.
When selecting the tracks of numbers larger than 3 digit figures (figures
from the number 100), please use the Digit buttons.
8
6
1
1
6
5
6
6
2,3,4,7
8
6
15
GB