Atrium Express Mini 500 Patient Instructions For Use

Emptying the Express Mini via
Pouring
If no syringe is available,
the port becomes clogged,
or the drain is almost full,
the Mini may also be emp-
tied by pouring. Clamp the
catheter with the blue slide
clamp.
Separate the white in-line
connection by pressing the
clear button.
Tip the drain to the right
with the tube pointing down
(do not tip upside-down).
Pour the contents into the
nearest suitable
receptacle.
Once empty, reconnect the
patient tubing to the drain
using the connector.
IMMEDIATELY, open the
blue slide clamp and the
Express Mini 500 is ready
to go.
In-line
Connector
Suction Port
Positive
Pressure
Relief Valve
Vacuum
Indicator
Needleless
Access Port
Warnings:
1. Do not tamper with the positive pressure relief valve located on
top of the drain.
2. Do not separate the in-line connector before clamping off the
patient tube.
3. Do not keep the patient tube closed during drainage collection
or transportation.
4. Do not connect any open luer-lock connectors to the needleless
access port located on the front of the drain.
5. Do not use or puncture the needleless access port with a
needle.
6. Do not puncture the patient tubing with an 18 gauge or larger
needle.
www. triummed.com
Atrium Medical Corporation Atrium Europe B.V.
5 Wentworth Drive Rendementsweg 20 B
Hudson, New Hampshire 03051 3641 SL Mijdrecht,
USA The Netherlands
Phone 603-880-1433 Phone +31-297-230-420
Fax 603-880-6718 Fax +31-297-282-653
© Atrium Medical Corporation 2007. All Rights Reserved Printed in U.S.A. 9/07 Part #003621D
Atrium and Express are trademarks of Atrium Medical Corporation.
Patient Tube
Air Leak
Atrium Express™ Mini 500
Window
Patient Instructions For Use
Collection
Chamber
EMERGENCY CONTACT INFORMATION:
Name:
Phone:
Atrium Australia-Pacific Rim Pty. Ltd.
L1 Bridgepoint
3 Brady Street
Mosman NSW 2088 Australia
Phone +61-2-9960-0169
Fax +61-2-8969-2735