Advertisement
Quick Links
®
Dryflow™ Filter
Equipped with AEM
No Oil Required!
INSTALLATION INSTRUCTIONS
PART NUMBER:
21-433B (Blue Finish)
21-433C (Gun Metal Grey Finish)
21-433P (Vacuum Metalized Chrome-VMC)
21-433R (Red Finish)
2000–2005 MITSUBISHI Eclipse
L4-2.4L
C.A.R.B. E.O. # D-670-15
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for AEM 21-433B
Summary of Contents for AEM 21-433B
- Page 1 ® Dryflow™ Filter Equipped with AEM No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-433B (Blue Finish) 21-433C (Gun Metal Grey Finish) 21-433P (Vacuum Metalized Chrome-VMC) 21-433R (Red Finish) 2000–2005 MITSUBISHI Eclipse L4-2.4L C.A.R.B. E.O. # D-670-15...
-
Page 2: Parts List
PARTS LIST Description Qty. Part Number Air Filter Assy. 2.75 X 5" Dry Ele. 21-202DK Upper Pipe 2-448 Lower Pipe 2-447 Adaptor, MAF 2-606 Hose; 3/8"ID X 6.5"L 5-10065 Nut, M6 Hex Serrated 444.460.04 Washer; 1"D X 1/4 Hole Fender 08160 Mount, Rubber 1"... - Page 3 Read and understand these instructions BEFORE attempting to install this product. Failure to follow installation instructions and not using the provided hardware may damage the intake tube, throttle body and engine. 1. Preparing Vehicle a. Make sure vehicle is parked on level surface. b.
- Page 4 c. Unplug the MAF sensor. Remove the stock inlet d. Loosen the four nuts that secure the MAF sensor pipe. Release four clamps on the air box and remove to the air box. Carefully remove and set aside the the upper air box from the vehicle. MAF sensor.
- Page 5 ® 3. Installation of AEM intake system. a. When installing the intake system, do not completely tighten the hose clamps or mounting hardware until instructed to do so. Size 52 clamp b. Attach the MAF adapter to the MAF sensor using c.
- Page 6 f. Install the supplied breather hose as shown. g. Attach the bracket on the upper pipe to the engine Secure both ends with supplied ¾” hose clamps. using the supplied 6mm bolt and washer. Place the pipe’s tab behind the stock plastic tab. Attach the MAF sensor assembly to the intake pipe as shown.
-
Page 7: Service And Maintenance
6. Service and Maintenance a. AEM Induction Systems requires cleaning the intake system’s air filter element every 100,000 miles. When used in dusty or off-road environments, our filters will require cleaning more often. We recommend that you visually inspect your filter once every 25,000 miles to determine if the screen is still visible.
Need help?
Do you have a question about the 21-433B and is the answer not in the manual?
Questions and answers