BBPOS Chipper 2X BT Quick Start

Chipper 2X TM BT
Advanced mPOS Design Integrating Bluetooth®
Magstripe, EMV and NFC Card Reading Functions
Support Operating System:
iOS, Android, Windows Phone 8, MS Windows
Index & Accessories (Fig.1)
For EMV Card Reading
For Magstripe
Card Reading
Lanyard holder
Micro USB Port for
Charging
Reset button
For NFC card
(**please use paper
reading
clip for reset)

Package Contents

Device
USB cable
Lanyard
Quick Start Guide
Application Download & Installation
This device can support either iOS & Android.
1. Please download the o cial application from app stores before operation .
2. Please follow app instructions to register and login for proper operation.
3. For any questions, please contact the o cial application developer.
Quick Start Procedures
STEP 1
www.bbpos.com
Connect Micro USB charging cable to charge the device as
shown to the right.
Download the o cial application from APP Store or Google
Play Store.
** Chipper™ 2X BT is powered by an internal Lithium Polymer rechargeable
battery pack that cannot be removed or replaced. Before rst use, charging is
required for approximately two to three hours. To prevent potential electrical
NFC status indicators
damage to the Chipper™ 2X BT , please be recommended to use the Micro
USB cable provided with the packaging only.**
LED Indicator
STEP 2
Turn on the device pairing function of your
smartphone/tablet. Then, press " " to turn on the
Chipper™ 2X BT.
Power button
** Please ensure that Bluetooth® function of your
smartphone/tablet is ON before device pairing.
X1
X1
X1
X1
APP
DOWNLOAD
Bluetooth
ON
Quick Start Procedures
STEP 3
Select Chipper™ 2X BT in the Scanned Device List on your
smartphone/tablet. Then, your Chipper™ 2X BT is
connected and green LED will ON.
STEP 4:
You can follow your application instruction to start the transaction process, then
swipe, insert or tap card to complete the transaction.
** If you pay via swiping card or inserting EMV IC card, please ensure that the magstripe or EMV chip of the
card is facing the right direction. If you pay using NFC card, please ensure you tap the NFC payment card
within 4cm range on top of the NFC marking.
NFC Status indicators
First LED ON LEDs ON in consecutive order
Ready for tapping card Reading card information
"BEEP" First LED ashing
Transaction completed Standby mode
Scanned
Device List
within 4 cm
4 LEDs ON + "BEEP"
Card reading process
successfully completed
2 "BEEP"s
Error, please retry