Page 1
ALD-14718 030718 S.S.C. HD A module for automatic satellite systems Installation and user’s guide Register pattern - Design and specifications are subject to change without notice info@alden.net.au Alden Australia, PO Box 7520 Garbutt QLD 4814...
Page 2
• The reception areas of the satellites are given as a guidance. Caution. • ALDEN can not be held responsable in any way, especially in the event of accidents that may occur if the instructions are not respected, whether it be the installation or the use of the product.
3. Place the screws at each mark and leave about 3mm of the screws out of the wall. 4. Put the module in place. 5. Undergo the wiring following the layout page 4 and 5. S.S.C. HD A Module - Installation and user’s guide - 030718 - 3...
2nd LNB In. OR to a 2nd satel- lite/Vast receiver. Coax cable + after ignition (1,5A. min.) S/PDIF VIDEO DC12V/5A AUDIO HDMI HDMI cable Power supply for compatible TV S.S.C. HD A Module - Installation and user’s guide - 030718 - 4...
• When installating with existing wiring, make sure the 3 cases above are respected. • Always use the provided cables • The warranty will no longer be applicable if these instructions are not followed. S.S.C. HD A Module - Installation and user’s guide - 030718 - 5...
The S.S.C. HD Module (Satellite Search Control) is a module designed to search for satellites such as OPTUS C3 - OPTUS C1 - OPTUS D2 - INTELSAT 19. The module can be used with all Alden’s satellite systems and connected to any digital receiver allowing the reception of the broadcasted programmes on the chosen satellite.
Page 7
2. Switch the receiver, S.S.C module and television off. Warning : The warranty will be void if you do not close the dish S.S.C. HD A Module - Installation and user’s guide - 030718 - 7...
1. TRANSP. MOD : Search data settings. This menu enables to select and set the data used for the search of the satellite. Caution: if not used correctly you may cause the module to dysfunction. Do not use without Alden’s or your dealer’s advice.
Page 9
Vansat. Sold until the end of 2013. PLANAR_R Not sold. MONDO ORB3CC Orbiter with 2 red arms (3 screws fixing the engine’s cover). SKY AUS See sticker on the base of the antenna. S.S.C. HD A Module - Installation and user’s guide - 030718 - 9...
85 % maximum Dimensions : l = 167 mm h = 110 mm p = 45 mm Weight : 0,30 kg Stand by consumption : 0,03 A S.S.C. HD A Module - Installation and user’s guide - 030718 - 10...
Page 11
Drilling layout S.S.C. HD A Module - Installation and user’s guide - 030718 - 11...
Page 12
For more information about where you can dispose of your equipment for recycling, please contact your local city office, or other authority, approved WEEE scheme or your household waste disposal service. (EEA : Norway, Iceland and Liechtenstein) S.S.C. HD A Module - Installation and user’s guide - 030718 - 12...
Need help?
Do you have a question about the S.S.C. HD A module and is the answer not in the manual?
Questions and answers