Related Manuals for Samsung SCC-B5396
Summary of Contents for Samsung SCC-B5396
-
Page 1: User Manual
DIGITAL COLOR DOME CAMERA user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsungsecurity.com SCC-B5396 SCC-B5398... -
Page 2: Safety Information
Safety information CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. - Page 3 fi re or electric shock. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
-
Page 4: Important Safety Instructions
Important Safety Instructions WARNING Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi... -
Page 5: Table Of Contents
Contents Introduction Features Product & Accessories Part Names and Functions Installation Installation procedure Adjusting the camera direction How to use OSD Menu Using Icons in the Menu Main Menu Profi le Camera Setup Intelligence Privacy Zone Setup Other Set System Information Language Specifi... -
Page 6: Features
Introduction FEATURES ❖ High Resolution • This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. ❖ Intelligent Motion Detection & Tracking • This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it displays an alert if an object passes / enters /exits the virtual fence or virtual area. - Page 7 Components Checking components in the package Camera Image Part name Standard Plastic anchor HUD 5 BH M5 X L6. ASSY screw machine (White+o-ring) ASSY screw TH M4xL30 (Black+ tapping o-ring) L-Wrench TROX T-20 Template Gasket-pipe hole T2.5 W56 – NOTE –...
- Page 8 Introduction Components of your camera Your camera has the following components: Lens Video connector Power connector 8 – DIGITAL COLOR DOME CAMERA Dome cover: Covers the inner cover, lens, and main body to protect them. Cover screw: Use it to assemble or disassemble both dome cover and case.
- Page 9 ❖ Setting switches • SETUP Switch This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the MAIN MENU appears. (Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the displayed value.
-
Page 10: Installation
Installing camera Before installation Before installing your camera, you have to read the following cautions: You have to check whether the location (ceiling or wall) can bear fi ve times the weight of your camera. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fi... - Page 11 3. Attach the Dome cover. (Screw the connection bolts tightly using the L-Wrench for waterproofi ng.) To change the SAMSUNG logo position, move the location of the connection rubber band as show below and rotate for assembly. (The rotation limit is 180 degree.)
-
Page 12: Adjusting The Camera Direction
Installation Adjusting the camera direction When the camera is fi xed on the ceiling, you can adjust the camera viewing angle. You can rotate your camera leftward or rightward (Panning), and can change the slope of your camera upward or downward (Tilting). In case of panning, the rotation limit of your camera is set to 355 degree (100 degree clockwise and 255 degree counterclockwise). -
Page 13: How To Use Osd Menu
How to use OSD Menu USING ICONS IN THE MENU • (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. • (RET) Returns to the previous menu. •... -
Page 14: Profi Le
How to use OSD Menu PROFILE In the PROFILE menu, you can confi gure the following camera settings at once. CAMERA SET Menu STANDARD Previous Sub-menus Menu IRIS LENS LEVEL BACKLIGHT MOTION (F.FAST)--- SHUTTER SENS-UP AUTOx4 DAY/ AUTO NIGHT NIGHT BURST 14 –... - Page 15 CAMERA SET Menu STANDARD Previous Sub-menus Menu WHITE MODE ATW2 BLUE NIGHT User setting BRIGHTNESS allowed MODE User setting allowed User setting BLUE allowed DETAIL ❖ It will be set automatically so you can easily check the traffi c conditions. ❖...
-
Page 16: Camera Setup
How to use OSD Menu CAMERA SETUP CAMERA SET CAMERA ID IRIS MOTION (F.FAST)--- SHUTTER SENS-UP AUTO X4 FLICKERLESS (OFF)--- DAY/NIGHT AUTO WHITE BAL DIGITAL ZOOM DETAIL V-SYNC AGC COLOR SUP REVERSE POSI/NEGA 16 – DIGITAL COLOR DOME CAMERA Setup the general functions of zoom camera module. Use the switch to select a menu item. - Page 17 LEVEL BACKLIGHT The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “–” will decrease it. If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area.
- Page 18 How to use OSD Menu AGC FIX LEVEL [01] If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen. As a fi xed value of the AGC gain is used in FIX mode, you can select one of the 16 detailed levels from VERY LOW to VERY HIGH before fi...
- Page 19 Note : If the SENS-UP function is set to AUTO, only items of – OFF and AUTO are available in the SHUTTER menu. If the SENS-UP mode is set to FIX, the SHUTTER menu – will be deactivated. If the FLICKERLESS function is set to ON, the SHUTTER menu –...
- Page 20 How to use OSD Menu If you press the SETUP switch with a NIGHT sub menu selected, you will see a menu where you can set Burst to OFF/ON. If BURST is set to ON, the Burst signal will output together with the black-and-white composite video signal.
- Page 21 You can specify MASK 1 and 2 simultaneously. The MASK is only for determining the mode switching, and any excessive bright area at night will be excluded by the confi gured MASK. Note : – If BACKLIGHT is set to BLC, the MASK AREA function will be deactivated.
- Page 22 How to use OSD Menu • ATW1(Auto Tracing White Balance mode 1): The camera can automatically adjust the color temperature in real time, according to the ambient conditions. The color temperature ranges from approx. 2500K to 9300K. • ATW2: The color temperature ranges from approx.
-
Page 23: Intelligence
Note : – Use of DC 12V will fi x V-SYNC to INT, which can not be changed. ❖ AGC COLOR SUP Adjust the color scheme according to the AGC value. ❖ REVERSE Mirrors video signals horizontally, vertically, or both. - Page 24 How to use OSD Menu ❖ ADVANCED [OFF, FIXED/MOVED, FENCE] Detects a motion of an object and displays an image of any moving object before tracking the moving route. • FENCE This is to detect if a moving object passes through the specifi...
- Page 25 - How to set the area PIXEL LEVEL <SIZE> <LOCATION> If you press the SETUP switch with the AREA option set to ON, you can specify the position and size of the area. If you change the PIXEL LEVEL for setting the position, specify the pixel that moves by a single pressure of the In <SIZE>, press the SETUP switch and use...
-
Page 26: Privacy Zone Setup
How to use OSD Menu ❖ DISPLAY [ON, OFF] With the DISPLAY option set to ON, a motion or a set ADVANCED function will be displayed on the screen, if detected. ❖ SENSITIVITY [1~7] Set the sensitivity of the motion detection. ❖... -
Page 27: Other Set
- How to set the point You can set each position of the 4 points. If you press the SETUP switch in <POINT>, you will see the points available in the PRIVACY ZONE. Each time you press the SETUP switch, the points available will move. Use the switch to set the position of each point. -
Page 28: System Information
How to use OSD Menu SYSTEM INFORMATION SYSTEM INFO TYPE 3_VAR_NOR_P SERIAL NO. 000000000000000 CAMERA VER. 0.50_090101 You can check the system information such as SERIAL NO and CAMERA VER. LANGUAGE LANGUAGE ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO The camera supports 5 different languages. Select a preferred language. -
Page 29: Specifi Cations
Specifi cations SPECIFICATIONS Items Sub-items Camera Type Device Image Pixels System Scanning Line Frame Scanning Internal Mode Horizontal Frequency Line-lock Mode Internal Mode Vertical Frequency Line-lock Mode Sens-up Min. Scene Illumination 512 times 512 times 512 times Number of Privacy Zone Day/Night Motion Detection eXtended Dynamic Range(XDR) - Page 30 VBS 1.0Vp-p, 75 Ω Approx. 52dB Auto Iris (DC) SCC-B5396 : focal length = 2.5 to 6.0mm / Aperture ratio = F 1.2 SCC-B5398 : focal length = 2.8 to 11.0mm / Aperture ratio = F 1.2 0 ~ 355°(100° in CW(Clockwise) direction, 255°...
- Page 31 Items Sub-items Camera Type Device Image Total Pixels Effective System Scanning Line Frame Scanning Internal Mode Horizontal Frequency Line-lock Mode Internal Mode Vertical Frequency Line-lock Mode Sens-up Min. Scene Illumination 512 times 512 times 512 times Number of Privacy Zone Day/Night Motion Detection eXtended Dynamic Range(XDR)
- Page 32 VBS 1.0Vp-p, 75 Ω Approx. 52dB Auto Iris (DC) SCC-B5396 : focal length = 2.5 to 6.0mm / Aperture ratio = F 1.2 SCC-B5398 : focal length = 2.8 to 11.0mm / Aperture ratio = F 1.2 0 ~ 355°(100° in CW(Clockwise) direction, 255°...
- Page 33 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.