Setting; Wi-Fi; Ethernet; Bluetooth - Philips 24BDL4151T User Manual

4.

Setting

Main items:

(1) Wi-Fi

(2) Ethernet

(3) Bluetooth

(4) Signage Display
(5) Display
(6) Apps
(7) Storage
(8) Security
(9) Language & input
(10) Date & time
(11) Developer options
(12) About
4.1. Wi-Fi
Enable/disable Wi-Fi connection through main switch in Setting ->
Wi-Fi. Screen will show this list of availed Wi-Fi AP (Access Point) in
below after enabled Wi-Fi.
Note :
When Wi-Fi is enabled, Ethernet will be disabled automatically.
4.2. Ethernet
Enable/Disable to turn on/off Ethernet
Ethernet configuration options list in below of main switch.
(1) Connection Type (Choose connection type: DHCP or Static
IP)
A. DHCP
Cannot modify IP Address, Netmask, DNS Address and
Gateway.
If connect successfully, it will display current network
configuration.
B. Static IP
In Static IP mode, user can input IP Address, Netmask, DNS
address and Gateway
Note:
IP address, netmask, DNS address and gateway address
input limitation
(1)Format: number 0-9, decimal point ". "
(2) Mac Address (Show Ethernet MAC address, cannot be
changed)
Note :
Ethernet will be disable automatically if Wi-Fi turn on and connect to
network.
4.3. Bluetooth
Enable/disable Bluetooth through main switch in Settings -> Bluetooth.
Switch the enable/disable switch to enable to turn on Bluetooth,
then device will start scanning other discoverable Bluetooth devices
and list in available devices. To turn Bluetooth off, switch then enable/
disable switch to disable.
To initiate a connection to other Bluetooth devices, click the item in
available devices. If system ask for PIN for pairing the device; enter the
PIN code.
4.4.

Signage Display

Signage Display to setup most features of signage display.
4.4.1. General Settings
Set up Signage Display name, ID, logo, boot on source and schedule.
1. Signage Display Name
Set up PD name, default name Ethernet MAC address with prefix
"PD_". For example, "PD_000b12223398". The max length of name
is 36 chars in UTF8 format. Click to rename it.
2. Monitor ID
Monitor ID in range 1 to 255 decimal and Monitor Group in range 1
to 254 decimal. Default monitor ID and monitor group are both 1.
3. Boot Logo
User can set up device boot up logo (boot animation) mode. Default
is ON.
A. Off: Turn off boot animation.
B. On: Turn on boot animation, using PHILIPS default logo.
15
24BDL4151T