Samsung DTB-H260F Owner's Instructions Manual page 9

1
CHAPTER ONE
Connecting the Set-Top Box
Connecting the Set-Top Box to a TV Set
Digital TV
1
Connect an antenna cable to the ANT/
CABLE IN jack on your Set-Top Box.
2
Connect the Video Cables.
 YP P format: Connect a Component
B R
video cable between the DTV OUT
(COMPONENT) jacks on your Set-Top Box
and the DTV INPUT jacks on the digital
TV.
 HDMI format: Connect a HDMI cable
between the HDMI OUT jack on your
Set-Top Box and the HDMI INPUT jack
on the digital TV.
3
Connect the Audio Cables.
Connect an audio cable between the L/R AUDIO OUT jacks on your Set-Top Box and L/R AUDIO IN jacks on
the digital TV.
NOTES
• You must set to Y, P , P with the DTV OUT SELECT switch on the rear of your Set-Top Box.
B R
• The On-Screen Display (OSD) menus are supported for DTV OUT (COMPONENT) and HDMI only.
14
<Digital TV>
1
CHAPTER ONE
Connecting the Set-Top Box
Digital Ready TV or Normal TV
1
Connect an antenna cable to the ANT/
CABLE IN jack on your Set-Top Box.
2
Connect the Video Cables.
 Digital Ready TV: Connect a
Component video cable between the
DTV OUT (Component) jacks on your
Set-Top Box and the VIDEO INPUT jacks
on TV. Or connect a HDMI cable between
the HDMI OUT jack on your Set-Top Box
and the HDMI INPUT jack on TV.
 Normal TV: Connect a video cable
between the VIDEO OUT jack on your
Set-Top Box and the VIDEO INPUT jack
on the TV. Or connect an S-Video cable
between the S-VIDEO OUT jack on your
Set-Top Box and the S-VIDEO INPUT jack
on the TV.
3
Connect the Audio Cables
 Digital Ready TV: Connect an audio
cable between the DOLBY DIGITAL OUT
(OPTICAL) jack on your Set-Top Box and
the DOLBY DIGITAL IN jack on the TV.
Or connect an audio cable between the
L/R AUDIO OUT jacks on your Set-Top
Box and L/R AUDIO IN jacks on the TV.
 Normal TV: Connect an audio cable
between the L/R AUDIO OUT jacks on
your Set-Top Box and L/R AUDIO IN
jacks on the TV.
NOTES
• The TV set must be "digital compatible" (i.e., it must have appropriate audio and digital
videoterminals).
• The On-Screen Display (OSD) menus are supported for DTV OUT (COMPONENT) and HDMI only.
• You must set to Y, P , P with the DTV OUT SELECT switch on the rear of your Set-Top Box.
B R
<Digital Ready TV>
< Normal TV>
15