Makita DBN600 Instruction Manual
Cordless finish nailer
Hide thumbs
Also See for DBN600:
- Instruction manual (85 pages) ,
- Repair manual (41 pages) ,
- Instruction manual (77 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Makita DBN600
Summary of Contents for Makita DBN600
- Page 1 INSTRUCTION MANUAL Cordless Finish Nailer DBN600 Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DBN600 Nail size 16Ga x 25 / 30 / 32 / 35 / 38 / 40 / 45 / 50 / 57 / 60 / 64 mm Magazine capacity 100 pcs. Dimensions without hook (L x W x H) -
Page 3: Ec Declaration Of Conformity
devices should contact the maker of their device and/ EC Declaration of Conformity or doctor for advice before operating this power tool. Personal Safety For European countries only Stay alert, watch what you are doing and use The EC declaration of conformity is included as Annex A common sense when operating a power tool. - Page 4 Power tool use and care Do not use a battery pack or tool that is dam- aged or modified. Damaged or modified batteries Do not force the power tool. Use the correct may exhibit unpredictable behaviour resulting in power tool for your application. The correct fire, explosion or risk of injury.
- Page 5 (gained from repeated use) replace causing fires, personal injury and damage. It will strict adherence to safety rules for the subject also void the Makita warranty for the Makita tool and product. MISUSE or failure to follow the safety charger. rules stated in this instruction manual may cause serious personal injury.
-
Page 6: Functional Description
Overload protection FUNCTIONAL When the tool/battery is operated in a manner that causes DESCRIPTION it to draw an abnormally high current, the tool automatically stops without any indication. In this situation, turn the tool off and stop the application that caused the tool to become CAUTION: Always be sure that the tool is overloaded. -
Page 7: Adjusting The Nailing Depth
Intermittent nailing (sequential mode) Indicator lamps Remaining This mode suits for driving a nail carefully and accurately. capacity Continuous/ intermittent nailing (continuous mode) When the tool is set to this mode, you can choose either Lighted Blinking continuous or intermittent nailing by sequences of the The battery trigger operation. - Page 8 ► 1 . Pusher lever ► 1 . Lamp Insert a connected nails into the slit on the bottom NOTE: Use a dry cloth to wipe the dirt off the lens of of the magazine. the lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination.
-
Page 9: Operation
► 1 . Nose adapter 2. Holder or only by placing the contact element against the workpiece. If you find such issues, contact Makita Hook authorized service centers for repairs. CAUTION:... - Page 10 NOTE: This tool stops automatically under the follow- CAUTION: Do not drive nails on hard mate- ing conditions: rials such as metal or the like. If the nail cannot • When you release the switch trigger or contact penetrate the material, the nailer may be kicked back element from workpiece before the tool finishes toward you and cause injury.
-
Page 11: Maintenance
Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. - Page 12 Jan-Baptist Vinkstraat 2, Makita Europe N.V. 3070 Kortenberg, Belgium 3-11-8, Sumiyoshi-cho, Makita Corporation Anjo, Aichi 446-8502 Japan 885612-224 www.makita.com 20170925...
Need help?
Do you have a question about the DBN600 and is the answer not in the manual?
Questions and answers