Bluetooth Test Mode; Audio Player Via Bluetooth; Bluetooth — Audio - Kenwood KMM-BT205 Instruction Manual

BLUETOOTH®
[INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; [NO]: Cancels.

Bluetooth test mode

You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
"PLEASE PAIR YOUR PHONE PIN 0000" appears on the display.
2
Search and select the name of your receiver ("KMM-BT3 "/
"KMM-BT2 ") on the Bluetooth device.
3
Operate the Bluetooth device to confirm pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility
PB DL: Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold B SRC to turn off the unit.
16
ENGLISH
BLUETOOTH — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.

Audio player via Bluetooth

1 Press B SRC repeatedly to select BT AUDIO.
• Pressing enters BT AUDIO directly.
2 Operate the audio player via Bluetooth to start playback.
To
Play back/pause
Select group or folder
Reverse skip/Forward skip
Reverse/Fast-forward
Repeat play
Random play
Select a file from a folder/list
On the faceplate
Press 6 IW.
Press 2 / 1 .
Press S / T.
Press and hold S / T.
Press 4 repeatedly.
[ALL REPEAT], [FILE REPEAT], [REPEAT OFF]
Press and hold 3 to select [ALL RANDOM].
• Press 3 to select [RANDOM OFF].
Refer to "Select a file from a folder/list" on
page 9.