Connecting With A Pc; Setting Up The Pc Environment - Samsung BP59-00136C-02 Owner's Instructions Manual

SCREEN SIZE
70"
80"
90"
100"
The projection distance is the horizontal distance between the projector and the screen.
2. When your U300 projector is
enjoy a clear screen with no distortions (keystone).

2-3-1 Connecting with a PC

1. Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable.
2. When connections are all completed, connect both power cords of the projector and the PC.
3. Connect the [VIDEO/PC AUDIO IN] input port of the projector to the speaker output ports of the PC using an audio cable.
This product supports plug and play and therefore, if you use Windows XP, you do not need to setup the driver on your PC.
Using the Projector
1. Turn on the projector and press the [SOURCE] button to select <PC>.
If the <PC> Mode is not available, make sure the PC video cable is properly connected.
2. Turn on the PC and set the PC Environment when necessary.
3. Adjust the screen.(Auto Adjustment)

2-3-2 Setting up the PC Environment

Check the following items before connecting your PC to your projector.
Installation and Connection
Projection
Range(D)
2959mm / 116.5
inches
3386mm / 133.3
inches
3812mm / 150.0
inches
4238mm / 166.9
inches
installed in a location where the projection distance matches the screen diagonal
Screen width(A)
HEIGHT(B)
1422mm / 56.0 1067mm / 42.0
inches inches
1626mm / 64.0 1219mm / 48.0
inches inches
1829mm / 72.0 1372mm / 54.0
inches inches
2032mm / 80.0 1524mm / 60.0
inches inches
SCREEN
SCREEN
DIAGONAL
LENGTH(C)
1778mm / 70.0
inches
2032mm / 80.0
inches
2286mm / 90.0
inches
2540mm / 100.0
inches
length, you will
2-3-1