Samsung BP59-00134G-01 Owner's Instructions Manual page 44

MENU
Video Type
Caption
Reset
3-5
If the screen quality is abnormal as a result of the projector not identifying the input signal type auto-
matically in <PC> or <HDMI> mode, you can manually set the input signal.
In <PC> mode, <Video Type> is only enabled if the input signal is AV Timing (D-Sub). However,
for a separate H/V sync., <Video Type> is only enabled for the 1280 x 720p 59.94 Hz/60 Hz
signals.
In <HDMI> mode, <Video Type> is only enabled for the 640x480p 59.94Hz/60 Hz and
1280x720p 59.94Hz/60 Hz signals.
• <Auto>-<RGB(PC)>-<RGB(AV)>-<YPbPr(AV)> : <PC> mode
• <Auto>-<PC>-<AV> : <HDMI> mode
The <Caption> function is supported when subtitles are contained in the external analog signal (from
either the Video or S-Video terminal).
The <Caption> function will not operate in <PC> (including components) or <HDMI> mode.
Depending on the external signal, a change to the channel or <Field> settings may be required.
Each <Channel> and <Field> contains different information. <Field><2> carries additional
information to supplement information contained in <Field><1>.
(e.g. If English subtitles are provided on <Channel><1>, Spanish subtitles will be provided on
<Channel><2>.)
• <Caption> : <Off>-<On>
• <Mode> : <Caption>-<Text>
• <Channel> : <1>-<2>
• <Field> : <1>-<2>
Using this function, you can reset various settings to the factory default settings.
• <Factory Default> : Changes the settings to the factory defaults.
• <Reset Filter Time> : Resets the filter time.
DESCRIPTION
Usage
Color, PC menu and
Sharpness,Tint zoom
Using