Battery And Charging - aventon PACE 500 Owner's Manual

BATTERY AND CHARGING

The Pace 500 uses a Lithium-Ion battery which can be charged
on or off the bike. We recommend charging the battery off the
bike indoors, in moderate temperature conditions. To charge the
battery, plug the charger into the charging port and then connect
the charger to a wall outlet. The LED indicator light will be red
when charging and will turn green when charging is complete.
Take care of the battery to ensure a long service life:
• Charge and store the battery indoors if possible. The
battery can be removed from the bicycle for this purpose.
• Avoid extreme hot and cold temperatures.
• DO NOT submerge your bike or any of the components in
water. This action will void the warranty.
After many charging and discharge cycles, runtime and range will
be reduced. Replacement batteries are available from Aventon to
extend the life of your E-Bike. The lifespan of the battery is about
500 charge / discharge cycles.
When you install the battery on the Pace 500, it locks into place
automatically. To unlock it for removal, use the supplied key. Do
not ride the bicycle if the battery rattles or moves - it should be
firmly attached.
The Pace 500 battery contains a USB port for transmitting
diagnostic data only, not for charging. It will not charge or power
devices via USB.
6 PACE 500 OWNER'S MANUAL