Dimensions - Siemens Sitrans LR400 Instruction Manual

Dimensions

SITRANS LR400 (7ML5421 version) (without Temperature Extension)
connection
cover
electronics
cover
intermediate
flange
threaded
ring
process
flange*
horn
Process temperature and pressure capabilities are dependent upon
Note:
information on the process device tag. See Appendix IV (Process Pressure/
Temperature de-Rating). Reference drawing listed on the tag is available upon
request.
WARNING:
gasket materials which will fall within the limits of the flange and its
intended use and which are suitable for the service conditions.
*Flange according to DIN 2527 / ANSI B 16.5 / JIS B2238 bolt hole pattern
**An optional purging system can be installed between the flange and the horn antenna.
See page 13 for Air Purging information.
7ML19985FH06
204 mm
(8.0")
SITRANS LR 4 00
74 mm
(2.9")
93 mm
(3.7")
The user is responsible for the selection of bolting and
SITRANS LR400 (7ML5421) – INSTRUCTION MANUAL
257 mm
(10.1")**
191 mm
(7.5")
238 mm
(9.4")
earth
terminal
Page 9