2. Specifications Category Model name Connection System Interface Port Flow control Transmission speed (bps) Power Bluetooth Specification Service Distance Network Support (Master: Slave) Printing Profile Support Dimensions(W x L x H) Rx/Tx Buffer V1.00 WWW.SAMSUNGMINIPRINTERS.COM Specification RIF-BTM10 POS System (Printer : SRP-350, SRP-270) USB(PC), RS-232C(PC), UART(Printer) Hardware(RTS/CTS) 19200,9600...
3. System structure Connect Bluetooth master module to the USB port (or Serial) of PC and Bluetooth slave module to the printers. 1) A network between PC (Master) and Printers (Slave) is n : n. The number of PC can be infinite on network while printers can be max up to 7.
4. How to configure 1) Virtual serial port driver installation - Connect Bluetooth main (master) to USB port of PC - Found New Hardware Wizard detects new hardware by Plug and Play and select Include this location in the search. Then select the folder which contains - When installation completes, Found New Hardware Wizard will detects new hardware once again.
Page 6
5) Bluetooth master setting - Connect Bluetooth main (master/slave) to USB (or Serial) port of PC. - Execute BluetoothConfig_V2.x.exe - Select the port a) USB port: Select the virtual port b) Serial (RS-232C): Select the COM x connected. - Configure Adapter setting: - Register Printer setting: Search the printers around and save the printer address by button “Search”.
Attachment 1. “Virtual serial port driver installation” 1. Connect Bluetooth Master to USB port of PC. 2. Then Found New Hardware will show up and pop up Found New Hardware Wizard. Then select Installation from a list specific location (Advanced). 3.
Page 8
Attachment 2. Virtual serial port setting 1. Open Device Manager as the below path: : Start > Control Panel > System > Hardware > Device Manager 2. Select “USB Serial Port (COM x)” that is installed newly. Go to “Properties” by right button of mouse.
Page 9
3. Select the conditions as below at “Port Settings” and click “Advanced” 4. Set as below and apply “OK” (Note: Windows 98 dose not have “Serial Enumerator” or “Serial Printer” under “Miscellaneous Option.”) V1.00 WWW.SAMSUNGMINIPRINTERS.COM...
Page 10
Attachment 3. “Dip switch setting” 1. Bluetooth Function USB Master Serial Master Slaver Firmware download 2. Printer Baud rate (bps) and Handshaking setting Model 19200 SRP-350 9600 4800 2400 9600 SRP-270 4800 2400 19200 115200 SRP-370 38400 19200 9600 19200 SRP-500 9600 4800...
Page 11
Attachment 4. Bluetooth slave setting 1. Connect the Bluetooth main (Master/Slave) to the USB (or Serial) port on the PC. 2. Execute “BluetoothConfig_V2.x.exe” 3. Select the port a) USB port: Select the virtual port (COM x) of step 2). b) Serial (RS-232C): Select the COM x connected. 4.
Page 12
Attachment 5. Bluetooth master setting 1. Connect the Bluetooth main (Master/Slave) to the USB (or Serial) port on the PC. 2. Execute “BluetoothConfig_V2.x.exe” 3. Select the port a) USB port: Select the virtual port (COM x) of step 2). b) Serial (RS-232C): Select the COM x connected. 4.
Page 13
6. Select “Register Printers” 7. Select “Search” (The printer should be Power ON) 8. All Bluetooth Interface found will appear with address automatically. Just apply OK for saving in Bluetooth master. V1.00 WWW.SAMSUNGMINIPRINTERS.COM...
Page 14
9. Click “Close” 10. Select “Configure Adapter” and check “auto connect to printers” 11. Click “OK” and then “Quit” to exit. 12. Disconnect the Bluetooth main (Master/Slave) from the PC. V1.00 WWW.SAMSUNGMINIPRINTERS.COM...
Page 15
The below terms explains each item reading at Configure adapter 1) Bluetooth address - Individual address of each Bluetooth module. 2) Firmware version - Bluetooth firmware version. 3) Role - Selection of Master/Slave. 4) Baud rate - Transmission speed setting. 5) Flow control - Handshaking condition setting.
Page 16
Attachment 6. Printer driver installation & Test page printing 1. Once the setting’s complete, disconnect the Bluetooth master from the PC, reconnect it and initialize the system. Turn the printer off and then on to initialize the Bluetooth slave. Wait for approximately 20 seconds 3.
Page 17
6. Set the port settings as below (19200, 8, none, 1, hardware) 7. Click “OK” and then “Close”. 8. Open the printer drive again and click “Test Page Print”. 9. The windows test page prints. V1.00 WWW.SAMSUNGMINIPRINTERS.COM...