CHARGING THE BATTERY
Charge the player before using it for the fi rst time and when you haven't used it
for a long time.
The battery for your mp3 player will fully charge in about 2 hours, although total
charging time varies depending on your PC environment.
Before you start - Remove the earphones before connecting the direct connect USB adaptor.
1. Connect the mini plug end (A) of the direct connect USB adaptor to the Earphone/
USB Connection Jack of the player.
2. Connect the wide (USB) end (B) of the direct connect USB adaptor to the
USB port (
The LED will blink red while the battery is being charged. When done, it turns green.
When you need to recharge the battery
- When the battery is too low, the LED blinks red and the color of the selected play
NOTE
mode alternately. If the LED is turned off, this will not work.
- When the battery runs out, the LED blinks red.
If you are charging the player while it is connected to a laptop computer, make sure the
laptop's battery is also fully charged or that the laptop is plugged into its power source.
12 _ the basics
1
(A)
) on your PC as in the fi gure above.
(B)
2
Need help?
Do you have a question about the YP-S2 and is the answer not in the manual?
Questions and answers