Installing The Batteries; Programming The Remote Control - Samsung SIR-T150 Instructions Manual

Samsung digital tv set top box owner's instructions

Hide thumbs Also See for SIR-T150:

Table of Contents

CHAPTER TWO

Remote Control and On-Screen Menus

Special Notes:

#1 The Channel buttons (CH

To use these buttons, the available channels must first be memorized. (See page 3.1)

#2 The "TV" buttons (VOL +-, Mute, TV/Video and +100 ):

To use these buttons, you must first switch the remote control to "TV" mode.

(Use the SELECT button on the remote control to select "TV.")

#3 The "VCR" buttons (FF, REW, PLAY, STOP, PAUSE):

To use these buttons, you must first switch the remote control to "VCR" mode.

(Use the SELECT button on the remote control to select "VCR.")

#4 The "CATV" buttons

To use the CABLE Set-Top Box, you must first switch the remote control to "CATV"

mode. (Use the SELECT button on the remote control to select "CATV.")

#5 The "DVD" buttons (FF, REW, PLAY, STOP, PAUSE):

To use these buttons, you must first switch the remote control to "DVD" mode.

(Use the SELECT button on the remote control to select "DVD.")

Installing the Batteries

Press and remove the battery cover on the back of the remote control.

Put two AAA batteries into the compartment and replace the battery cover.

To program the remote control to operate a VCR, Cable Box, TV or DVD player, see

"Programming the Remote Control to Operate Other Components" (See page 4.11).

, FAV-CH):

2.3

Table of Contents