Control Knobs; Heating Elements - Haier HCC2220BEB User Manual

CONTROL KNOBS

Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The Control knobs turn in either direction and from any position to the desired
temperature setting or to OFF.
NOTE:
Once the element is turned Off, the Hot Surface indicator light will
remain illuminated until the surface temperature of the element has cooled.
The placement of each knob corresponds to the placement of the heating element
that it controls.
To Turn On Any Heating Element:
•
PUSH DOWN on the knob and TURN in either direction to desired heat setting.

HEATING ELEMENTS

The ceramic glass cooking surface will glow red when an element is on. Some parts
of the cooking surface may not glow red when an element is on. This is normal
operation.
Each radiant element has its own temperature limiter (sensor) to protect the
ceramic cooking surface from extreme high temperatures. The temperature limiter
will cycle the element on and off to maintain the selected heat level.
Use cookware about the same size as the surface cooking area. Cookware should
not extend more than ¹⁄₂" (13 mm) outside the area.
WARNING
Fire Hazard
7