Hitachi Compute Blade 2500 series, Compute Blade 500 series Installation Manual page 32

6 OS starts up.
.
Change the setting for /boot/grub/grub.conf referring to 4. Customizing /
boot/grub/grub.conf,
installation on page
• CB 520H B3 : Disable xHCI of USB configuration on UEFI setup menu for
Red Hat Enterprise Linux 6.5/6.6.
1 In the Resources tab of the Web console, from the tree view under
.
Modules, select the target server blade, and then in the EFI tab, click
Edit.
2 Click Device and I/O Ports.
.
3 In Device and I/O Ports setting dialog box, select Disabled on xHCI
.
of USB Configuration, and click Confirm.
4 In Confirm dialog box, click OK.
.
5 Wait for EFI settings.
.
CB 2000 server blade
• Time Required for X Logout
With X logout, it may take about 5 to 10 minutes to complete the logout
which has no effect on the system behavior.
• MTU Setting for ixgbe driver on 32-bit x86 kernel
When using ixgbe driver on 32-bit x86 kernel, use the default value: 1500
for MTU (maximum transmission unit).If MTU is more than 1500, a kernel
panic may occur.
• System Log Messages related to mcelog
The following messages may be dumped in the system log (/var/log/
messages). They do not affect the behavior.
2-12
Hitachi Compute Blade Series OS Installation Guide for Red Hat Enterprise Linux
Setup procedure on page
2-15.
Red Hat Enterprise Linux 6
2-15, Setting up after