Table of Contents
Advertisement
2) Scan List
You can set the scan list via CPS Program.
7.1.6 ZONE
Up to 16 zones (with up to 32 channels per zone) can be programmed into the radio via CPS
program.
7.1.7 Setting
This function allows the changes to the settings of the radio status.
There are Power level, Encryption, Voice Operated Transmit (VOX), Lone worker, BCL/BCLO,
Keypad lock, Tones, LCD Backlight, LCD Contrast/Brightness, LED control, Language etc.
1) TX Output
This function sets the power transmitting level at high or low.
2) Voice Encryption
This is a feature to encrypt the incoming and outgoing voice.
Voice Encryption function can only be performed from digital channel to each channel.
Voice Encryption code is set via CPS Program.
Encryption code can be set from 0 to 65535.
3)
VOX
VOX function allows transmitting voice without pressing the PTT button.
VOX sensitivity level is adjusted from 1 to 5 and can be set by users via CPS program.
4) Lone Worker
This function can inform others about your safety within the time set in the menu.
Setting time is from 1 minute to 100 minutes
19
Advertisement
Table of Contents
