FujiFilm FRONTIER 350 Instruction Manual
  1. Manuals
  2. Brands
  3. FujiFilm Manuals
  4. Controller
  5. FRONTIER 350
  6. Instruction manual
FujiFilm FRONTIER 350 Instruction Manual

FujiFilm FRONTIER 350 Instruction Manual

Digital minilab manager printer controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

distributed by www.minilablaser.com
INSTRUCTION MANUAL
< Optional Software >
DIGITAL MINILAB
FRONTIER
350/370 355/375/570
Frontier Manager Printer Controller
Frontier Manager Printer Controller Ver.2.0
(FRONTIER 350/370 System Disk Ver.7.7)
(FRONTIER 355/375 System Disk Ver.1.7)
First Edition
(FRONTIER 570 System Disk Ver.1.7)
PP3-B1212E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FRONTIER 350 and is the answer not in the manual?

Questions and answers

Rodriguez
April 3, 2025

Le problème de démarrage avec fuji 570. Lampe rouge allumé.

User image 67eea00364358
0

Related Manuals for FujiFilm FRONTIER 350

Summary of Contents for FujiFilm FRONTIER 350

  • Page 1 INSTRUCTION MANUAL < Optional Software > DIGITAL MINILAB FRONTIER 350/370 355/375/570 Frontier Manager Printer Controller Frontier Manager Printer Controller Ver.2.0 (FRONTIER 350/370 System Disk Ver.7.7) (FRONTIER 355/375 System Disk Ver.1.7) First Edition (FRONTIER 570 System Disk Ver.1.7) PP3-B1212E...
  • Page 2 INTRODUCTION • This instruction manual explains the procedures for operating and maintaining the Frontier Manager Printer Controller (referred to as FMPC) for Fujifilm Digital Minilab FRONTIER 350/370/355/375/570 as well as precautions for use. • To ensure the proper use and optimum performance of the FMPC, read this manual thoroughly.

  • Page 3: Table Of Contents

    Pre-operational Checks in FMPC ..................3.2.1 Processing Solution Temperature Confirmation ..........3.2.2 Control Strip Processing ..................3.2.3 Upkeep Printing....................Pre-operational Checks in FRONTIER 350/370..............3.3.1 Mirror Box Cleaning .................... 3.3.2 Auto Film Carrier NC240Y Cleaning ..............3.3.3 Auto Film Carrier NC135Y Cleaning ..............
  • Page 4 5.2.3 When “W-1621” Message Dialog Appears............Precaution for Use of PU800B ................... After Printing .......................... Post-operational Checks and Shut-down in FRONTIER 350/370 ........Post-operational Checks and Shut-down in FRONTIER 355/375/570 ....... 6.2.1 Cleaning the Auto Film Carrier NC100AY ............6.2.2 Cleaning Around the Machine ................
  • Page 5 distributed by www.minilablaser.com 8.2.6 Installation Information Confirmation (416) ............8.2.7 Data Backup (417) ....................8.2.8 DI Manager Administrative Setting (41l) ............. 8.2.9 Paper Condition Setup (421)................8.2.10 Processor Solution Temperature Check (422) ............ 8.2.11 Control Strip Processing (423) ................8.2.12 Print Size Setup (424) ..................
  • Page 6 distributed by www.minilablaser.com 9.2.13 Paper Magazine Registration (451) ..............121 9.2.14 Paper Magazine Feeding Fine Adjustment (452)..........124 9.2.15 G Laser (SHG) Optimal Temperature Setup (454) ..........125 9.2.16 Paper Feed (455) ....................126 9.2.17 Printer Temperature Display (456) ..............126 9.2.18 Printer Input Check (457) ..................

  • Page 7: Operational Safety And Use Conditions

    distributed by www.minilablaser.com Operational Safety and Use Conditions Before using the equipment, read carefully and understand thoroughly the precautions set forth in this section. The safety precautions are classified into WARNING and CAUTION categories. Supplementary operating instructions are given under IMPORTANT and NOTE categories. These four categories are defined as follows.

  • Page 8: Safety

    distributed by www.minilablaser.com Safety 1.1.1 Basic Operating Precautions • When accessing the machine interior for inspection or servicing, shut down the system by proceeding with the post-operational checks, place the built-in circuit breaker in the OFF position, and turn OFF the main power circuit breaker.

  • Page 9: Room Conditions

    distributed by www.minilablaser.com Room Conditions • Temperature: 15° to 30°C (59° to 86°F) Ambient room temperatures above 30°C (86°F) or below 15°C (59°F) will destabilize processing and replenisher solution temperatures to the detriment of processing performance. Pay special attention to room temperatures in wintertime and maintain solution temperatures within designated ranges.

  • Page 10: Component Names And Related Functions

    distributed by www.minilablaser.com Component Names and Related Functions This section gives the component names and describes their external and internal structure. External View 2.1.1 System Configuration [FMPC + FRONTIER 570] Scanner (SP) FMPC IEEE 1394 Cable LAN Cable IEEE 1394 Cable LAN Cable Imaging Controller...
  • Page 11 distributed by www.minilablaser.com [FMPC + FRONTIER 355/375] Scanner (SP) FMPC IEEE 1394 Cable LAN Cable IEEE 1394 Cable Printer (LP) LAN Cable Imaging Controller...
  • Page 12 [FMPC + FRONTIER 350/370] Scanner (SP) FMPC IEEE 1394 Cable IEEE 1394 Cable LAN Cable Printer (LP) LAN Cable Imaging Controller...

  • Page 13: Fmpc + Sp1500/Sp2000/Sp3000

    2.1.2 FMPC + SP1500/SP2000/SP3000 [FRONTIER 355/375/570 (SP3000)] [FRONTIER 350/370 (SP1500/SP2000)] Monitor for FMPC and FRONTIER SP 1500/2000 Monitor for FMPC and SP3000 Scanner (SP) FRONTIER Switcher Mouse Scanner (SP) Operation Keyboard Main Control Unit FMPC Full Keyboard...

  • Page 14: Fmpc Screen

    distributed by www.minilablaser.com FMPC Screen 2.2.1 Main Menu Screen 1. Date 7. Task Switcher Button Shows the current date. Displays the selection windows, where you can 2. Time select the application to be displayed in the Shows the current time. foreground.

  • Page 15: Printing Status Screen

    distributed by www.minilablaser.com 2.2.2 Printing Status Screen IMPORTANT When performing the film printing from the scanner(SP), make sure that the Printing Status screen is opened after the pre-operational check is completed. If the printing is started before the Printing Status screen does not appear, the operation may be stopped.
  • Page 16 distributed by www.minilablaser.com [D] Image Q’ty: Shows number of images in Data is reserved until the system is shut down. The width of columns can be changed with the the order. mouse operation. [E] Total: Shows the total number in the order.
  • Page 17 distributed by www.minilablaser.com [Printer] : Printer status, laser temperature 9. Switch Magazine and magazine information Displays the magazine selecting menu. Magazine can be switched only when “Forwarding orders sopped” appears in the “Status”. (See “3 Status”.) 10. Image Memory Status [Processor] : Processor status and temperature Displays the current memory consuming status in Printer(LP).
  • Page 18 distributed by www.minilablaser.com 14. [Memory Clear] button Clears the order already transferred to the image processing memory. Number of sheets indicated in “Waiting” status in “Sheets being processed”. IMPORTANT Note that executing of [Order Clear] deletes all images of the order that is currently being processed.

  • Page 19: Sp3000 Printing Screen

    distributed by www.minilablaser.com 2.2.3 SP3000 Printing Screen When film is inserted into the film carrier, the printing screen appears. On the printing screen, print conditions can be set for each frame. 1. Selected Frame 5. [Sort/Order] Button Fixes the order and displays the “Order Data Display”...

  • Page 20: Sp1500/2000 Printing Screen

    distributed by www.minilablaser.com 2.2.4 SP1500/2000 Printing Screen Printer Status Icon Selected Frame Windows Switcher Memory Indicator Menu Bar Emergency Stop Switch Printing Status Bar Status Display Function Key Icon Display Remote Error Icon When this icon blincks, an error such as paper width mismatch occurs in the FMPC.

  • Page 21: Before Printing

    (See 3.1.4) Pre-operational Checks in FMPC (See 3.2) Pre-operational Checks in FRONTIER (See 3.3 for FRONTIER 350/370. See 3.4 for FRONTIER 355/375/570.) IMPORTANT Make sure to start up the system by using the following procedures. 3.1.1 Starting Up the Imaging Controller The “Order Reception”...

  • Page 22: Printer (Lp) Start-Up

    The following procedures are not necessary when the switch to [STANDBY] during the post-operational FRONTIER is start up with the timer setting. check. [FRONTIER 350/370/355/375] 3.1.3 FMPC Start-up Check if the built-in breaker is turned ON, then turn ON the power switch.

  • Page 23: Scanner (Sp) Start-Up

    3.1.4 Scanner (SP) Start-up Main Menu screen appears. [FRONTIER 350/370] Press the [Start] button to start up the scanner. [FRONTIER 350/370] EZ1192 [FRONTIER 355/375/570] [FRONTIER 355/375/570] Z2040 IMPORTANT When starting up the LP5700, set the power switch to [STANDBY] during the post-operational...

  • Page 24: Pre-Operational Checks In Fmpc

    FMPC From this page, working place (device) is indicated with the following abbreviated name in the upper right- hand corner. Frontier Manager Printer Controller : FMPC FRONTIER 350/370 : F350/370 FRONTIER 355/375/570 : F355/375/570 FRONTIER 570 : F570...

  • Page 25: Processing Solution Temperature Confirmation

    The processing solution performance is evaluated by processing a control strip, measuring the processed strip densities, and comparing them with the reference strip densities. Process the control strip. If not performed, click [Cancel]. [FRONTIER 350/370/355/375] Reference: Display Heater Warm up When the processing solution temperatures reach their set values, click [OK].

  • Page 26: Upkeep Printing

    distributed by www.minilablaser.com FMPC 3.2.3 Upkeep Printing Densitometer AD100: With this operation, the system automatically makes an upkeep print and measures its densities to produce the same quality prints as those of the day before. In this way, the system maintains consistent printing conditions.
  • Page 27 distributed by www.minilablaser.com FMPC Densitometer Operation Panel: If density measurement has not been completed within the specified period, the message below Indicator Light Ready Measuring Error appears. Repeat density measurement from Step Power (Green) On Ready (Green) On Blinks Error (Red) Press the reset switch (orange) if an error occurs.
  • Page 28 distributed by www.minilablaser.com FMPC Click [Cancel]. • The printing screen appears. If the upkeep printing is skipped or after performing the upkeep printing in Setup and Maintenance , control returns to the Main Menu screen.

  • Page 29: Pre-Operational Checks In Frontier 350/370

    F350/370 Pre-operational Checks in FRONTIER 350/370 Perform the pre-operational checks in FRONTIER 350/370. For the procedures in FRONTIER 355/375, see 3.4 pre-operational Checks in FRONTIER 355/375 . Select the 1 Pre-operational Check on the 3.3.1 Mirror Box Cleaning Main Menu screen and click [OK].

  • Page 30: Auto Film Carrier Nc240Y Cleaning

    distributed by www.minilablaser.com F350/370 3.3.2 Auto Film Carrier NC240Y Blow off any dirt or dust adhering to the sensors (glass surfaces) and film guide sections using Cleaning the blower brush. Sensor Film Guide Do not use spray cleaners containing combustible substances as these constitute a fire hazard.
  • Page 31 distributed by www.minilablaser.com F350/370 While rotating the roller cleaning knob, use a Remove any dirt or dust adhering to the groove cotton swab moistened with magnet cleaner in the mask using a cotton swab and blower (MC-100) to remove any dirt or dust adhering to brush.

  • Page 32: Auto Film Carrier Nc135Y Cleaning

    distributed by www.minilablaser.com F350/370 3.3.3 Auto Film Carrier NC135Y Align the “ ” mark on the film carrier with the rail and push the carrier all the way in. Cleaning Film Carrier NC240Y Rail Do not use spray cleaners containing combustible substances as these constitute a fire hazard.
  • Page 33 distributed by www.minilablaser.com F350/370 Blow off any dirt or dust adhering to the sensors Remove any dirt or dust adhering to the guide (glass surfaces) and film guide sections using rollers using a cotton swab. the blower brush. Swab Sensors EZ1324 While rotating the roller cleaning knob, use a Blower Brush...
  • Page 34 distributed by www.minilablaser.com F350/370 Lightly wipe any dirt or dust off the upper and Blow off any dirt or dust adhering to the opening lower surfaces of the diffusion plate using a lens in the pressure cover using the blower brush. cleaning cloth.

  • Page 35: Scanner Correction

    distributed by www.minilablaser.com F350/370 3.3.4 Scanner Correction Click [END]. Perform this procedure to carry out the automatic correction of the scanner conditions in order to obtain consistent print quality. Click [OK]. • The printing screen appears. If the “Wait! Lamp stabilizing” message appears, wait until it disappears.

  • Page 36: Pre-Operational Checks In Frontier

    F355/375/570 Pre-operational Checks in FRONTIER 355/375/570 Perform the pre-operational checks in FRONTIER 355/375/570. For the procedures in FRONTIER 350/370, see “3.3 Pre-operational Checks in FRONTIER 350/370”. Vacuum or sweep any dirt or dust adhering to the table mat. If the film receiver becomes dirty, remove it and vacuum any dust and then clean it using a cloth.

  • Page 37: Diffusion Box/Led Board Cover Cleaning

    distributed by www.minilablaser.com F355/375/570 3.4.1 Diffusion Box/LED Board Cover Blow off any dirt or dust adhering to the top and bottom of the diffusion box using the blower Cleaning brush. Clean the diffusion box and LED board cover. Diffusion Box (Top) Blower Brush IMPORTANT If the diffusion box is not cleaned, any dirt adhering to...

  • Page 38: Auto Film Carrier Nc100Ay Cleaning

    distributed by www.minilablaser.com F355/375/570 3.4.2 Auto Film Carrier NC100AY Blow off any dirt or dust adhering to the top of the LED board cover using the blower brush. Cleaning Blower Brush LED Board Cover Clean the auto film carrier NC100AY. IMPORTANT If the auto film carrier NC100AC is not cleaned, any dirt adhering to the film feed section may cause film...
  • Page 39 distributed by www.minilablaser.com F355/375/570 Press the pressure cover release lever to release Click the [Next Page] button. the lock, and then open the pressure cover. • The second screen of “2 Film Carrier Cleaning” Pressure Cover appears. Release Lever Pressure Cover Z2054 Blow off any dirt or dust adhering to the sensors (glass surfaces) using the blower brush.
  • Page 40 distributed by www.minilablaser.com F355/375/570 • The third screen of “2 Film Carrier Cleaning” Click the [Next Page] button. appears. • The fourth screen of “2 Film Carrier Cleaning” appears. Blow off any dirt or dust adhering to the upper and lower surfaces of the diffusion plates on the 135 full lower mask and 135 half lower mask Remove any dirt or dust adhering to the dust (optional) using the blower brush.

  • Page 41: Scanner Correction

    distributed by www.minilablaser.com F355/375/570 3.4.3 Scanner Correction Click the [Next Page] button. • The fifth screen of “2 Film Carrier Cleaning” Perform scanner correction to carry out the appears. automatic correction of the scanner conditions in order to obtain consistent print quality. Blow off any dirt or dust adhering to the 135 full, 135 half (option) and IX240 upper masks using Hold the film carrier as shown, align the “...
  • Page 42 distributed by www.minilablaser.com F355/375/570 Click the [Start] button. When the optional multi-film carrier (135 size) is used, perform scanner correction by following the procedure below. Do not insert film. (1) Pull the film carrier lock release lever to release • Scanner correction is started. the film carrier.
  • Page 43 distributed by www.minilablaser.com F355/375/570 (6) Align the “ ” mark on the multi-film carrier with When the optional multi-film carrier (120/220 the “ ” mark on the scanner section, and then size) is used, perform scanner correction by push the carrier in until it stops. following the procedure below.
  • Page 44 distributed by www.minilablaser.com F355/375/570 • Scanner correction is started. (5) Open the upper cover of the multi-film carrier. Upper Cover Calibration Mask Multi-film Carrier MFC10AY Z2074 • After the completion of the correction, the message “The scanner correction is completed” appears.

  • Page 45: Paper Preparations

    distributed by www.minilablaser.com Paper Preparations FMPC Switching the “Auto”, “Upper” or “Lower” Paper Magazines On the Main Menu screen, select “2 Print” and Click the “Switch Magazine (1)” and select click the [OK] button. “Auto”, “Upper” or “Lower”. Auto: The upper or lower paper magazine is selected automatically in accordance with the print size selected.

  • Page 46: Printing

    distributed by www.minilablaser.com Printing IMPORTANT When performing the film printing from the scanner(SP), make sure that the Printing Status screen is opened after the pre-operational check is completed. If the printing is started before the Printing Status screen does not appear, the operation may be stopped.
  • Page 47 distributed by www.minilablaser.com Select the images to be printed. To register all Specify if or not the index/large index is to be images, click the [Select All] button. outputted, and its output size, and then if the DSC date is to be printed on the print or not. Select the images.
  • Page 48 distributed by www.minilablaser.com FMPC Click the [Set] button. The image files are listed Click the [OK] button. up in the [Order Specification Column]. Click. Registering of order is completed. Click the [Set] button. Click the [Order Regist.] button. The Steps from 15 on are done on the FMPC. Printing is automatically started on the FMPC.

  • Page 49: Printing From Frontier (135-Size Film Example)

    5.1.2 Printing from FRONTIER The orders are moved to the “Done” field, and printing is completed. (135-size film example) ■ FRONTIER 350/370 IMPORTANT When performing the film printing from the scanner(SP), make sure that the Printing Status screen is opened after the pre-operational check is completed.
  • Page 50 distributed by www.minilablaser.com F350/370 FMPC If necessary, correct color and density while When the last frame is completed, the sort dialog viewing the color positive image on the monitor box appears automatically. screen. Press the [START/ENTER] key if the film feed mode The message shown below appears.
  • Page 51 distributed by www.minilablaser.com FMPC F355/375/570 ■ FRONTIER 355/375/570 Press the button of the switcher to display the FMPC main menu screen. IMPORTANT When performing the film printing from the scanner(SP), make sure that the Printing Status screen is opened after the pre-operational check is completed.
  • Page 52 distributed by www.minilablaser.com F355/375/570 FMPC To skip frames not to be printed, select them, then Proceed with scanning of the images. press the [PASS] key. IMPORTANT Do not touch the film while it is being fed through the carriage. Pulling out the film at this time will cause abnormal printing results.
  • Page 53 distributed by www.minilablaser.com FMPC If the [Resume] button appears at the bottom of the IMPORTANT screen, click it to switch to the [Next Order Stop] The orders that are registered in the FMPC button. So printing is started. cannot be deleted with the [Print Stop] key. To delete them, select orders one by one, then click The printed orders are moved to the “Done”...

  • Page 54: Paper Mismatched In Fmpc

    distributed by www.minilablaser.com FMPC Paper Mismatched in FMPC 5.2.1 When “W-8102” Message Dialog Appears The print-waiting orders that are listed up in the “Next Print” list cannot be printed with the currently installed paper(s). Wait for a moment with no operation, so this message will disappear, then other print-waiting orders with the setting of paper that matches the currently installed paper will be printed automatically, while skipping the orders with the mismatched paper setting.

  • Page 55: When "W-1621" Message Dialog Appears

    distributed by www.minilablaser.com FMPC 5.2.3 When “W-1621” Message Dialog Appears Mismatching of papers occurred in the same order, and no correct paper magazine was installed. This problem occurs especially when the paper width of index print is different from that of normal print. IMPORTANT If the [Abort] button is clicked during processing of the orders, transferring of orders is stopped, but they remain in the system.

  • Page 56: Precaution For Use Of Pu800B

    distributed by www.minilablaser.com Precaution for Use of PU800B The PU800B can be connected to the FMPC only when using the SP1500/2000 as scanner. When using it by connecting to the FMPC, the billing information about digitizing (Fujicolor CD) is not outputted. When connecting the PU800B to the SP1500/2000/3000, the billing information about DSC print is not outputted.

  • Page 57: After Printing

    (See 6.4) Post-operational Checks and Shut-down in FRONTIER 350/370 Perform the post-operational checks in FRONTIER 350/370 and then shut it down. (For the procedures in FRONTIER 355/375/570, see “6.2 Post-operational Checks in FRONTIER 355/375/570”.) On the printing screen, select the “Quit (1)” in the Select the “Post-operational Checks”...
  • Page 58 distributed by www.minilablaser.com F350/370 • The “[31] Inspection Item Display” screen Use a cotton swab moistened with magnet appears. cleaner (MC-100) to remove any dirt or dust adhering to the magnetic heads. Magnetic Head Pull up the release lever as shown in the figure to Swab release the pressure cover.
  • Page 59 distributed by www.minilablaser.com F350/370 To save the data in the FD, follow the steps blew. (1) Click the [FD Save] button. (2) Insert the FD into the FD drive, then click the [OK] button. • The data is saved in the FD. (3) Remove the FD from the drive, then click the [OK] button.

  • Page 60: Post-Operational Checks And Shut-Down In Frontier

    Post-operational Checks and Shut-down in FRONTIER 355/375/570 Perform the post-operational checks in FRONTIER 355/375/570 and then shut it down. (For the procedure in FRONTIER 350/370, See “6.1 Post-operational checks and shut-down in FRONTIER 350/370”.) IMPORTANT When shutting down the system with the post-operational checks, be sure to perform all the items in the order of 1’3’4’6.
  • Page 61 distributed by www.minilablaser.com F355/375/570 Pull the film carrier lock release lever to release Use a cotton swab moistened with alcohol the film carrier. solution (50% ethanol) to remove any dirt or dust adhering to the rollers. Film Carrier Handles Lock Release Lever Cotton Swab Auto Film Carrier NC100AY...
  • Page 62 distributed by www.minilablaser.com F355/375/570 While rotating the roller cleaning knob, use a Remove any dirt or dust adhering to the winding cotton swab moistened with alcohol solution section roller using a lens cleaning cloth while (50% ethanol) to remove any dirt or dust rotating the roller cleaning knob.

  • Page 63: Cleaning Around The Machine

    distributed by www.minilablaser.com F355/375/570 6.2.2 Cleaning Around the Machine 6.2.3 Recording the Daily Processing Volume Data and Clearing the Data Clean around the machine and then click the [OK] button. Select the “Negative”, “Reversal”, “Digital Image” or “All” from the “Film type” box to display production •...

  • Page 64: System Shutdown

    distributed by www.minilablaser.com F355/375/570 6.2.4 System Shutdown Click the [OK] button. • The “System Shutdown” screen appears. Click the [OK] button. • The data is stored onto the hard disk. Control returns to the [6 Shut Down] screen, if [Cancel] is clicked. When restarting the system immediately after the scanner is turned OFF, be sure to wait for more than 12 seconds before pressing the START switch.

  • Page 65: Post-Operational Checks And Shut-Down In Fmpc

    distributed by www.minilablaser.com FMPC Post-operational Checks and Shut-down in FMPC Click the “Post Check” in the bottom left-hand (3) Remove the FD from the drive, then click the corner of the screen. [OK] button. IMPORTANT Make sure that the FD is removed from the FD drive.
  • Page 66 distributed by www.minilablaser.com FMPC Click [OK]. Click [Shut Down]. • The data is stored onto the hard disk. • The processor auto cleaning is performed, and the processor automatically changes to STANDBY. • The “Next Timer ON Date/Time Check” screen appears.

  • Page 67: Shutting Down Imaging Controller

    distributed by www.minilablaser.com Shutting Down Imaging Controller Shut down the Imaging Controller. Click the [Exit] icon on the DI changer. To shut down the computer, click the [Exit] button while pressing the [Shift] button. Select [Shut Down] from the [Start] menu at the bottom of the desktop.
  • Page 68 distributed by www.minilablaser.com In case of Windows 2000, Select [Shut down] Turn OFF the monitor. and click the [OK] button. [Windows 2000] FD036 Turn OFF the Imaging Controller. Turn OFF the media units (PC card reader, CD- R, Zip, MO drives, etc.) FD032 FD034 Turn OFF the flatbed scanner.

  • Page 69: Emergency Stop

    distributed by www.minilablaser.com Emergency Stop FMPC Emergency Power OFF in FMPC When operation is impossible, try to remove and reinstall the film carrier. If this does not solve the problem, follow the steps described below to shut down the system. Click the emergency stop switch [ ! ] in the upper Press the system start switch to start the system right-hand corner of the screen.

  • Page 70: Emergency Power Off In Scanner (Sp)

    Click the emergency stop switch [ ! ] in the upper If an error occurs after the restart, consult your right-hand corner of the screen. technical representative. [FRONTIER 350/370] Click the emergency stop switch [ ! ] in the upper right-hand corner of the screen. Click.

  • Page 71: Manual Shut-Off Of Printer Power

    If a strange odor or unusual sound emanates, abnormal heat is generated or smoke appears from the printer/ processor, immediately follow the steps described below, and consult your technical representative. [FRONTIER 350/370/355/375] [FRONTIER 570] Immediately turn the power switch to STANDBY.

  • Page 72: Measures Against Fmpc Failures

    Type (in FRONTIER 350/370) the [Start] button. To return to the direct-connecting type in FRONTIER 350/370, use the following procedures. Make sure that the FMPC is turned ON, and that at least one IEEE1394 board operates normally. (IEEE1394 board also functions as repeater.) On the “Main Menu”...
  • Page 73 distributed by www.minilablaser.com FMPC F350/370 On the “Main Menu” screen in the scanner (SP), Connect the IEEE1394 cable from the printer select [3 Post-operational Check], then click the and the one from the scanner to the connectors [OK] button, then shut down the scanner. on the same board in the FMPC.

  • Page 74: To Return To Direct-Connecting Type (In Frontier 355/375/570)

    distributed by www.minilablaser.com F355/375/570 7.4.2 To Return to Direct-connecting After the restart, the “Main Menu” screen appears. Type (in FRONTIER 355/375/570) To return to the direct-connecting type in FRONTIER 355/375, use the following procedures. On the “Main Menu” screen in the scanner (SP), click the [Setup and Maintenance] button.
  • Page 75 distributed by www.minilablaser.com F355/375/570 FMPC The [0140 Installation Information Setup] screen Switch the display to FMPC by pressing the appears. button on the switcher. MP019 Select “LP1500/2000” or “LP5000” as printer. The display can be switched also by pressing the [Ctrl] key twice swiftly.
  • Page 76 distributed by www.minilablaser.com FMPC Connect the IEEE1394 cable from printer (LP) to After the restart, the “Main Menu” screen the scanner (SP). appears. MP048 IMPORTANT Turn on the printer (LP). To perform printing from the Imaging Controller, the FMPC logical device name on the In this case, the printer (LP) cannot be started up administration screen in each DI application on remotely by turning on the scanner (SP).

  • Page 77: Setup And Maintenance (Frontier 350/370/355/375)

    Setup and Maintenance (FRONTIER 350/370/355/375) FMPC Operator Menu 8.1.1 Menu Screen Display Click [OK]. Open the “Setup and Maintenance” operator menu screen by following the procedures shown below. On the “Main Menu”, select the “4 Setup and Maintenance”...

  • Page 78: Production Information

    distributed by www.minilablaser.com FMPC 8.1.2 Production Information • The “Clear production information?” dialog box appears. Open the “4 Setup and Maintenance” menu (2) Click [OK]. screen (see Section 8.1). • The production data is erased. Click [OK]. Select the “1 Production Information 1”. Click [START].

  • Page 79: Paper Condition Setup

    distributed by www.minilablaser.com FMPC 8.1.3 Paper Condition Setup Click [Print]. When new paper is loaded, follow the procedure described below to set up the new paper condition. Open the “4 Setup and Maintenance” menu screen (see Section 8.1). • After about 5 minutes, an upkeep print is delivered to the large-size tray.
  • Page 80 distributed by www.minilablaser.com FMPC Adjust the guide of the densitometer according Press the [START] button on the densitometer. to the width of the condition setup print. Densitometer Guides [START] Button EZ636 EZ634 If the message below appears, click [OK] and repeat the density measurement from Step 6 .

  • Page 81: Processing Solution Temperature Check

    distributed by www.minilablaser.com FMPC 8.1.4 Processing Solution Temperature If the “Density Measurement Result” is NG, the message at the bottom of the last page appears. Check Perform the Steps 5 to 10 again until the result becomes OK. Open the “4 Setup and Maintenance” menu screen (see Section 8.1).

  • Page 82: Control Strip Processing

    distributed by www.minilablaser.com FMPC 8.1.5 Control Strip Processing Select the “END [1]” on the menu bar. The processing solution performance is evaluated by processing a control strip, measuring the processed strip densities, and comparing them with the reference strip densities. Take the control strip package out of the freezer, and leave it for about one hour to bring it to room temperature.
  • Page 83 distributed by www.minilablaser.com FMPC Pass your hands through the sleeves of the dark Click [OK] to start the control strip processing. box, take one control strip out of the inner bag, and insert it into the control strip holder, as shown in the figure.
  • Page 84 distributed by www.minilablaser.com FMPC Open the cover of the control strip holder port in Remove the control strip holder from the port in the processor cover, and position the holder so the processor cover. that its “EMULSION SURFACE” mark faces the processor side.

  • Page 85: Dic Order Back Printing Setup

    distributed by www.minilablaser.com FMPC ■ Control Strip Storage and Handling Pre- 8.1.6 DIC Order Back Printing Setup cautions Open the “4 Setup and Maintenance” menu REFERENCE: screen (see Section 8.1). A control strip is used for checking the performance of the processing solutions.

  • Page 86: Replenisher Pump Output Measurement

    distributed by www.minilablaser.com FMPC 8.1.7 Replenisher Pump Output Select “1 Pump Output Measurement/Setting”, and press the [START] key. Measurement • The “[461] Pump Output Measurement/Setting” If the replenisher pump output is reduced, improper screen appears. processing and drop in level of solution in the processing tank may result.
  • Page 87 distributed by www.minilablaser.com FMPC Before the pump starts discharging, disconnect Click [OK]. the PS-R replenisher nozzle and insert it into the measuring cylinder. PS-R Replenisher Nozzle • Operation returns to the “4 Setup and Maintenance” screen. Measuring Cylinder EZ747 Select the “END [1]” on the menu bar. •...

  • Page 88: Auto-Cleaning Pump Output Measurement

    distributed by www.minilablaser.com FMPC 8.1.8 Auto-cleaning Pump Output Release the lock release lever and remove the No.1 crossover rack. Measurement Lock Release lever If the auto-cleaning pump output is reduced, improper processing and drop in processing tank No.1 solution may result. Crossover Rack Processing solutions may irritate the eyes and skin.
  • Page 89 distributed by www.minilablaser.com FMPC Install each auto-cleaning nozzle into a Select “2 Auto-cleaning Output Measurement/ measuring vessel. Setting”, and click [START]. Auto-cleaning Nozzle • The “[462] Auto-cleaning Output Measurement/ Setting” screen appears. Measuring Vessel EZ1067 Install the measuring vessels on the processing rack by aligning their rubber joints with the washing solution tank holes.
  • Page 90 distributed by www.minilablaser.com FMPC Remove the measuring vessels by releasing the Click [OK]. locks. Measuring Vessel Lock Release Lever EZ1069 • Control returns to the “4 Setup and Maintenance” screen. Hold the measuring vessels upright, read both vessels, add up the total volume and record it. Select the “END [1]”...

  • Page 91: Laboratory Manager Menu

    distributed by www.minilablaser.com FMPC Laboratory Manager Menu 8.2.1 Menu Screen Display To perform the setup and maintenance operations, select the [+] button of the desired item from the “Item List” box. NOTE: For details of mouse operation, see the “Basic Operation Instructions”...

  • Page 92: Production Information 2 (412)

    distributed by www.minilablaser.com FMPC 8.2.3 Production Information 2 (412) • The data is cleared and date of clearance appears. [Selection] Click [OK]. “4 Setup and Maintenance” - “1 System Operation Setup and Check” - “2 Production Information 2” [Procedure] This menu is to view accumulated number of products.

  • Page 93: Timer Setup (414)

    distributed by www.minilablaser.com FMPC 8.2.4 Timer Setup (414) NOTE: Night-time preheating is usually conducted when the room temperature drops below 10 °C (50 °F) at [Selection] night and the temperature is not controlled for 8 or “4 Setup and Maintenance” - “1 System Operation more hours.

  • Page 94: Error Information Check (415)

    distributed by www.minilablaser.com FMPC 8.2.5 Error Information Check (415) Click [Log Information]. [Selection] “4 Setup and Maintenance” - “1 System Operation Setup and Check” - “5 Error Information Check” [Procedure] The system error log is listed up in order of date and time.

  • Page 95: Installation Information Confirmation

    distributed by www.minilablaser.com FMPC 8.2.6 Installation Information 8.2.7 Data Backup (417) Confirmation (416) [Selection] [Selection] “4 Setup and Maintenance” - “1 System Operation “4 Setup and Maintenance” - “1 System Operation Setup and Check” - “7 Data Backup” Setup and Check” - “6 Installation Information Confirmation”...

  • Page 96: Di Manager Administrative Setting (41L)

    distributed by www.minilablaser.com FMPC 8.2.8 DI Manager Administrative Setting Click [OK]. (41l) Set the time to delete the order that is completed on the DI Controller. [Selection] “4 Setup and Maintenance” - “1 System Operation • “Making the backup of the data” message Setup and Check”...

  • Page 97: Paper Condition Setup

    distributed by www.minilablaser.com FMPC 8.2.9 Paper Condition Setup (421) 8.2.12 Print Size Setup (424) See “8.1.3 Paper Condition Setup”. [Selection] “4 Setup and Maintenance” - “2 Print Condition Setup and Check” - “4 Print Size Setup” 8.2.10 Processor Solution Temperature Check (422) [Procedure] Set the print size to be used.

  • Page 98: Dic Order Back Printing Setup

    distributed by www.minilablaser.com FMPC 8.2.13 DIC Order Back Printing Setup See “8.1.6 DIC Order Back Printing Setup”. 8.2.14 Paper Magazine Registration (451) [Selection] “4 Setup and Maintenance” - “5 Printer Adjustment/ Maintenance” - “1 Paper Magazine Registration” Select the print size to be modified or registered [Procedure] from the list.
  • Page 99 distributed by www.minilablaser.com FMPC Remove the two screws and adjust the paper NOTE: To register paper not listed in the table, use a fresh guide width in accordance with the paper width. magazine ID not used. Click [Set]. Screws (2) Paper Guide EZ854 NOTE:...

  • Page 100: Paper Feed Length Adjustment (452)

    distributed by www.minilablaser.com FMPC 8.2.15 Paper Feed Length Adjustment Add the “Adding Value” to the value in the “Fine adjust value” and enter it in the “Fine adjust (452) value” box. [Selection] <Example> “4 Setup and Maintenance” - “5 Printer Adjustment/ Fine adjust value = 1.0mm Maintenance”...

  • Page 101: G, B Laser (Shg) Optimal Temperature Setup (454)

    distributed by www.minilablaser.com FMPC 8.2.16 G, B Laser (SHG) Optimal 8.2.17 Paper Feed (455) Temperature Setup (454) [Selection] [Selection] “4 Setup and Maintenance” - “5 Printer Adjustment/ “4 Setup and Maintenance” - “5 Printer Adjustment/ Maintenance” - “5 Paper Feed” Maintenance”...

  • Page 102: Printer Temperature Display (456)

    distributed by www.minilablaser.com FMPC 8.2.18 Printer Temperature Display (456) 8.2.19 Printer Input Check (457) [Selection] [Selection] “4 Setup and Maintenance” - “5 Printer Adjustment/ “4 Setup and Maintenance” - “5 Printer Adjustment/ Maintenance” - “6 Printer Temperature Display” Maintenance” - “7 Printer Input Check” [Procedure] [Procedure] Printer temperature and its status are displayed.

  • Page 103: Image Position Fine Adjustment (458)

    distributed by www.minilablaser.com FMPC 8.2.20 Image Position Fine Adjustment NOTE: Adjusting Range: – 30mm to 30mm (458) Click [Set]. [Selection] “4 Setup and Maintenance” - “5 Printer Adjustment/ Click [End]. Maintenance” - “8 Image Position Fine Adjustment” • Operation returns to the “4 Setup and [Procedure] Maintenance”...

  • Page 104: Precut Length Setting (45V)

    distributed by www.minilablaser.com FMPC 8.2.22 Precut Length Setting (45V) Click [End]. [Selection] “4 Setup and Maintenance” - “5 Printer Adjustment/ Maintenance” - “V Precut Length Setting” [Procedure] Set up precut length of paper leading end that is cut and processed when the paper magazine is set or the printer is started.

  • Page 105: Processing Temperature Setting (463)

    distributed by www.minilablaser.com FMPC 8.2.25 Processing Temperature Setting 8.2.26 Replenisher Rate Setup (464) (463) [Selection] [Selection] “4 Setup and Maintenance” - “6 Processor “4 Setup and Maintenance” - “6 Processor Adjustment/Maintenance” - “4 Replenisher Rate Adjustment/Maintenance” - “3 Processing Setting” Temperature Setting”...

  • Page 106: Evaporation Correction Rate Setting (465)

    distributed by www.minilablaser.com FMPC 8.2.27 Evaporation Correction Rate 8.2.28 Low Volume Setting (466) Setting (465) [Selection] [Selection] “4 Setup and Maintenance” - “6 Processor “4 Setup and Maintenance” - “6 Processor Adjustment/Maintenance” - “6 Low volume Setting” Adjustment/Maintenance” - “5 Evaporation Correction Rate Setting”...

  • Page 107: Processor Temperature Calibration (467)

    distributed by www.minilablaser.com FMPC 8.2.29 Processor Temperature Measure the temperature of the processing solution and record it. Calibration (467) [Selection] “4 Setup and Maintenance” - “6 Processor Adjustment/Maintenance” - “7 Processor Temperature Calibration” [Procedure] Perform the processor section temperature calibrations. EZ749 Check that the display values reach the “Setting”...

  • Page 108: Processor Input Check (468)

    distributed by www.minilablaser.com FMPC 8.2.30 Processor Input Check (468) Click [OK]. [Selection] “4 Setup and Maintenance” - “6 Processor Adjustment/Maintenance” - “8 Processor Input Check” [Procedure] Check the status of the sensors. Click [End]. • Operation returns to the “4 Setup and Maintenance”...

  • Page 109: Setup And Maintenance (Frontier 570)

    distributed by www.minilablaser.com Setup and Maintenance (FRONTIER 570) FMPC Operator Menu 9.1.1 Menu Screen Display Click [OK]. Open the “Setup and Maintenance” operator menu screen by following the procedures shown below. On the “Main Menu” screen, select the “4” Setup and Maintenance”...

  • Page 110: Production Information

    distributed by www.minilablaser.com FMPC 9.1.2 Production Information (3) Remove the FD from the drive, then click the [OK] button. Open the “4 Setup and Maintenance” menu To clear the data, follow the steps below. screen (see Section 8.1). (1) Click [Clear]. •...

  • Page 111: Paper Condition Setup

    distributed by www.minilablaser.com FMPC 9.1.3 Paper Condition Setup Adjust the densitometer guide to match the width of the condition setup print. When new paper is loaded, follow the procedure Densitometer Guides described below to set up the new paper condition. Open the “4 Setup and Maintenance”...

  • Page 112: Dic Order Back Printing Setup

    distributed by www.minilablaser.com FMPC Densitometer Operation Panel: 9.1.4 DIC Order Back Printing Setup Indicator Light Ready Measuring Error Open the “4 Setup and Maintenance” menu Power (Green) On screen (see Section 8.1). Ready (Green) On Blinks Error (Red) Select “O DIC Order Back Print Setup”, and then click [START].

  • Page 113: Laboratory Manager Menu

    distributed by www.minilablaser.com FMPC Laboratory Manager Menu 9.2.1 Menu Screen Display To perform the setup and maintenance operations, select the [+] button of the desired item from the “Item List” box. NOTE: For details of mouse operation, see the “Basic Operation Instructions”...

  • Page 114: Production Information 1 (411)

    distributed by www.minilablaser.com FMPC 9.2.2 Production Information 1 (411) (2) Then press click [Clear]. This menu is for daily confirmation of the volume of production. See “9.1.2 Production Information”. • The “Clear production information?” dialog box 9.2.3 Production Information 2 (412) appears.

  • Page 115: Accumulated Production Information (413)

    distributed by www.minilablaser.com FMPC 9.2.4 Accumulated Production Click [OK]. Information (413) [Selection] “4 Setup and Maintenance” - “1 System Operation Setup and Check” - “3 Accumulated Production Information” [Procedure] This menu is to view accumulated amount of production not to be cleared. The whole production information can be confirmed by selecting “All”...

  • Page 116: Timer Setup (414)

    distributed by www.minilablaser.com FMPC 9.2.5 Timer Setup (414) (3) Remove the FD from the drive, then click the [OK] button. [Selection] IMPORTANT “4 Setup and Maintenance” - “1 System Operation Make sure that the FD is removed from the FD Setup and Check”...

  • Page 117: Error Information Check (415)

    distributed by www.minilablaser.com FMPC 9.2.6 Error Information Check (415) If, for instance, the calendar timer is set to 5:00 AM and night-time preheating is turned ON at 3:30 AM, all the power will be shut down two [Selection] hours later at 5:30 AM. “4 Setup and Maintenance”...

  • Page 118: Installation Information Confirmation (416)

    distributed by www.minilablaser.com FMPC 9.2.7 Installation Information Click the [Accum. info.] button. Confirmation (416) • The accumulated information for the target sub- system is displayed. The error code and number [Selection] of occurrences are displayed in ascending order “4 Setup and Maintenance” - “1 System Operation of error code.

  • Page 119: Data Backup (417)

    distributed by www.minilablaser.com FMPC 9.2.8 Data Backup (417) Insert the floppy disk into the floppy drive of the main control unit. The data backup FD should be kept in a fixed place near the machine because it is used after recovering from trouble or when upgrading the system software.

  • Page 120: Di Manager Administrative Setting (41I)

    distributed by www.minilablaser.com FMPC 9.2.9 DI Manager Administrative Setting 9.2.10 Paper Condition Setup (421) (41I) (See “9.1.3 Paper Condition Setup”.) [Selection] “4 Setup and Maintenance” - “1 System Operation Setup and Check” - “I DI Manager Administrative 9.2.11 Print Size Setup (424) Setting”...

  • Page 121: Dic Order Back Printing Setup

    distributed by www.minilablaser.com FMPC 9.2.12 DIC Order Back Printing Setup Select the print size to be modified or registered from the list. See 9.1.4 DIC Order Back Printing Setup”. 9.2.13 Paper Magazine Registration (451) [Selection] “4 Setup and Maintenance” - “5 Printer Adjustment/ Maintenance”...
  • Page 122 distributed by www.minilablaser.com FMPC Click the [Next Page] button. Do not try to remove the other parts and covers secured by the screws. Paper Guides Screws (2) “ID”: Enter the magazine ID. L2361 “P1R”: Enter the P1R replenishment rate. “P2R”: Enter the P2R replenishment rate.
  • Page 123 distributed by www.minilablaser.com FMPC <Example> NOTE: Be careful not to overtighten the screws. When adding a 210mm width paper magazine, install the No. 7 ID chip. ID Chip Hole/Paper Width Mark Paper Flanges Screws (4) Screw L2368 L2366 Choose the appropriate paper from the table and NOTE: install its ID chip to the magazine using the •...

  • Page 124: Paper Magazine Feeding Fine Adjustment (452)

    distributed by www.minilablaser.com FMPC 9.2.14 Paper Magazine Feeding Fine • Prints 1 and 2 are output in about 2 minutes. Adjustment (452) The feed length should be adjusted on this menu when a new magazine is registered. [Selection] Print1 “4 Setup and maintenance” - “5 Printer Adjustment/ Maintenance”...

  • Page 125: G Laser (Shg) Optimal Temperature Setup (454)

    distributed by www.minilablaser.com FMPC 9.2.15 G Laser (SHG) Optimal Temperature Setup (454) Once every three months, the G laser optimal temperature setting message (W-2532) appears. Set up the optimal temperature on this menu. [Selection] “4 Setup and Maintenance” - “5 Printer Adjustment/ Maintenance”...

  • Page 126: Paper Feed (455)

    distributed by www.minilablaser.com FMPC 9.2.16 Paper Feed (455) 9.2.17 Printer Temperature Display (456) This screen is used to check paper feed. The status of the temperature sensor in the printer can be checked. [Selection] “4 Setup and Maintenance” - “5 Printer Adjustment/ [Selection] Maintenance”...

  • Page 127: Printer Input Check (457)

    distributed by www.minilablaser.com FMPC 9.2.18 Printer Input Check (457) 9.2.19 Image Position and Tilt Fine Adjustment (458) The status of each sensor in the printer can be checked on this menu. This procedure is used to adjust the image position on prints.

  • Page 128: Printer Function Select (459)

    distributed by www.minilablaser.com FMPC 9.2.20 Printer Function Select (459) • Adjustment print is output in about 3 minutes. [Selection] Feeding “4 Setup and Maintenance” - “5 Printer Adjustment/ Direction Maintenance” - “9 Printer Function Select” [Procedure] Set the printer functions. Select the magazine ID to be adjusted.

  • Page 129: Pump Output Measurement/Setting (461)

    distributed by www.minilablaser.com FMPC 9.2.21 Pump Output Measurement/ (2) Open the distribution section inner cover. Setting (461) [Selection] “4 Setup and Maintenance” - “6 Processor Adjustment/Maintenance” - “1 Pump Output Measurement/Setting” [Procedure] Perform only PSR replenisher pump output measurement. Distribution Section Inner Cover L2216 (3) Align the “...
  • Page 130 distributed by www.minilablaser.com FMPC The countdown stops and the PSR pump starts to NOTE: Do not try to click the [Start] button other than one discharge. for “PSR”. • The alarm beeps twice when the discharging is completed. Return the nozzle to the PSR sub-tank. Put the measuring cylinder on a horizontal surface, read the liquid amount and record it.

  • Page 131: Auto Cleaning Output Measurement/Setting (462)

    distributed by www.minilablaser.com FMPC 9.2.22 Auto Cleaning Output Open the dryer unit and support it with Stopper 2 (yellow). Measurement/Setting (462) [Selection] “4 Setup and Maintenance” - “6 Processor Adjustment/Maintenance” - “2 Auto Cleaning Output Measurement/Setting” [Procedure] Confirm discharging process of the auto cleaning pump.

  • Page 132: Low Volume Processing Setup (466)

    distributed by www.minilablaser.com FMPC 9.2.23 Low Volume Processing Setup Remove the dryer entrance rack and make sure it is wet completely with cleaning water. (466) This menu is used to set up the automatic adjustment of water replenishment when the printing volume is low.

  • Page 133: Processor Temperature Calibration (467)

    distributed by www.minilablaser.com FMPC 9.2.24 Processor Temperature Open the replenisher box door. Calibration (467) Remove the circulation filter tray. This menu is used to calibrate the temperatures of Remove the P1 circulation filter and put it into the the solutions in the processing tanks. circulation filter tray.
  • Page 134 distributed by www.minilablaser.com FMPC Reinstall the filter by aligning the fastening tab Measure the temperature of the PS4 tank with the notch, and turn it 90° clockwise. solution and record it. P1 Filter Rod Thermometer Probe Notch L21049 L2234 Repeat Steps 8 and 9 for the PS4 tank solution. If the “Setting”...

  • Page 135: Processor Input Check (468)

    distributed by www.minilablaser.com FMPC 9.2.25 Processor Input Check (468) Click the [Next Page] button. The status of each sensor of the processor can be checked. [Selection] “4 Setup and Maintenance” - “6 Processor Adjustment/Maintenance” - “8 Processor Input Check” [Procedure] Check the status of the sensors.

  • Page 136: Processor Operating Condition Setup (46B)

    distributed by www.minilablaser.com FMPC 9.2.26 Processor Operating Condition Setup (46B) [Selection] “4 Setup and Maintenance” - “6 Processor Adjustment/Maintenance” - “B Processor Operating Condition Setup” [Procedure] Set the processor operating conditions. Normally set the processor operating conditions as shown in the table below. Rack auto cleaning Dryer entrance rack auto clean No.

  • Page 137: Error Messages

    distributed by www.minilablaser.com Error Messages The messages issued during the FMPC operations are as follows. For the scanner's (SP's) messages, see the FRONTIER manual. Message Actions W-1406 "%MAGAZINE% not installed or paper end processing in Set the magazine correctly. progress. After green LED lights on magazine section door, install magazine and restart printing.
  • Page 138 distributed by www.minilablaser.com Message Actions I-1507 Data backup completed abnormally. Re-try. I-1508 Cancel data backup. — W-1509 Not enough free space on hard disk. Unnecessary files If there are unnecessary files in D drive, delete them. have been deleted. W-1510 Date value exceeds the limit.
  • Page 139 distributed by www.minilablaser.com Message Actions W-1542 Print service not performed. Check the network 1. Connect the LAN cable correctly. connections. 2. Restart the system software. If problems persist, consult your technical representative. W-1543 Print service not performed. Check the network 1.
  • Page 140 distributed by www.minilablaser.com Message Actions W-1625 Magazine not exist. Press the [Order] button to output all current images forcibly. Press the [Image] to output forcibly the image currently processed only. It is recommended that you replace the magazine for the correct one, then press the [OK] button after initializing the printer, and then perform printing again.
  • Page 141 distributed by www.minilablaser.com Message Actions E-8236 Cannot be serviced. Click [OK] and control returns to the printing screen. Consult technical representative. E-8237 Cannot be serviced. Consult technical representative. Consult technical representative. W-8238 F-DI registration not performed. Click [OK] and control returns to the printing screen. Consult technical representative.

  • Page 142: Index

    distributed by www.minilablaser.com Index ———Main Menu Screen ........14 Accumulated Production Information (413) ———Printing Status Screen ..115 ........15 After Printing ———SP1500/2000 Printing Screen ...............57 ..... 20 Auto Cleaning Output Measurement/ ———SP3000 Printing Screen ....... 19 Setting (462) FMPC Specification ............
  • Page 143 Printer (LP) Start-up Paper Magazines ..........22 ..........45 Printer Temperature Display (456) System Configuration ....102 ..........10 Printing ———FMPC + FRONTIER 350/370 ................46 ...... 12 Printing Flow ———FMPC + FRONTIER 355/375 ...............46 ...... 11 Printing from FRONTIER ———FMPC + FRONTIER 570 ......
  • Page 144 distributed by www.minilablaser.com...
  • Page 145 All questions can be answered by checking [✓] the appropriate box(es), but in addition to these answers, please provide us with your written comments in the lined spaces following each block of questions. Title : FRONTIER 350/370 355/375/570 Frontier Manager Printer Controller Ver.2.0 Manual Title and Reference Number...
  • Page 146 Room 2208, Tower 6, The Gateway Harbour City, 9 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong FUJIFILM REGIONAL SERVICES (SINGAPORE) PTE. LTD. 10 New Industrial Road, Fujifilm Building, Singapore 536201 FUJI PHOTO FILM (THAILAND) LTD. S.P. Building, 8th Floor, 388 Phaholyothin Road, Bangkok 10400, Thailand FUJI PHOTO FILM (MALAYSIA) SDN.

This manual is also suitable for:

Frontier 370Frontier 355Frontier 570Frontier 375

Table of Contents

Save PDF