Yamaha NS-P41 Owner's Manual page 5

Maintenance
• If the temperature or humidity changes drastically, water
droplets (condensation) may form on the unit surface. If water
droplets form, immediately wipe them off with a soft cloth. If
water droplets are left on the unit, they may be absorbed into
the wooden parts, causing deformation.
• When cleaning the unit, use a dry, soft cloth. Using chemicals
such as benzine or thinner, cleaning agents, or chemical
scrubbing cloths can cause discoloration or deformation.
Speakers
• When connecting speakers in parallel, be sure to observe the
amplifier's specified load impedance range. (Refer to page 8.)
Failure to observe this may cause malfunctions in the
amplifier.
• Do not touch the speaker units. Failure to observe this may
damage the speaker units.
Information
About functions and data included in the
unit
• The speakers do not have a distinction between left and right.
• Air may be blown out from the bass reflex port. This is not a
malfunction. This occurs particularly often when outputting
music with heavy bass.
About content in this manual
• The illustrations and screens in this manual are for
instructional purposes only.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
VOLTAGE SELECTOR
(For China, Asia and General models)
The voltage selector switch on the rear panel of this
unit must be set to your local main voltage BEFORE
plugging this unit into the AC main supply.
Voltages are 110-120/220-240 V AC, 50/60 Hz.
CAN ICES-3 (B)/NMB-3(B)
This unit's speakers use magnets. Do not place items that are
sensitive to magnetism, such as CRT-type TVs, clocks, credit
cards, floppy disks, etc., on or beside this unit.
(can_b_02)
iv
En