Advertisement
Quick Links
Spraying Devices
Inc.
Turf Walker SC
Assembly Instructions
Spraying Devices Inc.
PO Box 3107
Visalia, CA 93278-3107
Phone: 559-734-5555
Fax: 559-734-5591
sales@sprayingdevices.com
www.sprayingdevices.com
Pro du c t / Se r v i ce
Congratulations on your purchase of the SDI Turf Walker SC self contained
walking spray boom! We know you'll be delighted with your purchase and it will
serve you well for many years.
2)
Install the wheels on the axle
(#33) using the supplied bolts attaching
the wheel with longest bolt in the cen-
ter position. Be sure the magnet faces
the speedometer pickup on the axle.
3)
Attach the spray gun to the top
of the frame tubing using the existing
3/8 x 1 1/4" bolt.
After opening the box, remove the packing
material and inspect for damage that might
have occurred during shipping. You should
have all the parts shown at left.
1)
Move the frame tubing (#9 on drawing)
to the upright position and insert the 3/8 x 1
1/4" (#60) bolt into the lower hole on each
side.
Advertisement
Summary of Contents for SDI Turf Walker SC
-
Page 1: Assembly Instructions
Inc. Turf Walker SC Assembly Instructions Congratulations on your purchase of the SDI Turf Walker SC self contained walking spray boom! We know you’ll be delighted with your purchase and it will serve you well for many years. After opening the box, remove the packing material and inspect for damage that might have occurred during shipping. - Page 2 Fold down the boom in preparation for spraying. Move to the rear of the Turf Walker SC, grip the handle of the spray gun and squeeze the handle to start the spray. It may take a few seconds for the pump to prime and fill the hoses with water.
Need help?
Do you have a question about the Turf Walker SC and is the answer not in the manual?
Questions and answers