Using A Mac Os X Computer With Chicken Of The Vnc; Using A Windows Computer With Tight Vnc - Trinnov Audio ALTITUDE 16 User Manual

2. 1 .6 _USING A MAC OS X COMPUTER WITH CHICKEN OF THE VNC

To connect to the Altitude
1. Open the Chicken of the VNC software in your Mac OS X computer.
2. The VNC Login window shows a list of available VNC servers. Select the server "VNC server on Altitude
where XX is the number of your Altitude
3. The Host's IP address is automatically filled. You only need to enter the password, which is the six-digit serial
number of your Altitude
• the password is 00000X, if the number of your Altitude
• the password is 0000XX if the number of your Altitude
• the password is 000XXX if the number of your Altitude
• etc.
4. Click on the Connect button located in the lower left corner of the window.
5. The graphical user interface of your Altitude

2. 1 .7 _USING A WINDOWS COMPUTER WITH TIGHT VNC

Since Tight VNC is not a zero-conf client, the connection procedure requires some additional steps,
which are described below.
WRITE DOWN YOUR ALTITUDE
1. Go to your Altitude 's back panel to find out its serial number. The 6-digit serial number is printed above the
16
MADE IN FRANCE tag: it is "123456" in the example below:
2. the VNC password is the six-digit serial number of your Altitude
Figure 21: a serial number as
printed on the back panel of
the Altitude
16
's VNC Server with the Chicken of the VNC client from a Mac OS X computer:
16
.
16
Figure 20: Chicken of the VNC Login window
:
16
should now be visible on the screen of your Mac.
16
• The password is 00000X, if the number of your Altitude
digit;
• The password is 0000XX if the number of your Altitude
• The password is 000XXX if the number of your Altitude
• Etc...
's VNC Server has a single digit;
16
's VNC Server has 2 digits;
16
's VNC Server has 3 digits;
16
'S SERIAL NUMBER
16
:
16
-XX",
16
's VNC Server has a single
16
's VNC Server has 2 digits;
16
's VNC Server has 3 digits;
16
Altitude _ USER MANUAL
16
33