Spare Parts List - Stern TRENDY SOAP DISPENSER B Installation And Maintenance Manual

SPARE PARTS LIST

10-PACK SENSOR KIT - ELITE, TRENDY, EXTREME
SEALS AND SCREWS KIT ELITE, TRENDY, EXTREME
SOAP DISPENSER PUMP ASSEMBLY
6-PACK SOAP BOTTLE 1L
6-PACK 1L BOTTLE SUPPORT KIT
IP67 BATTERY BOX FOR 6 XD ALKALINE BATTERIES
12V SWITCHING TRANSFORMER (EU)
REMOTE CONTROL (Optional)
SOAP & WATER REMOTE CONTROL (Optional)
MAINTENANCE
Care and cleaning of chrome and special finishes
DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or the like.
Use of any prohibited cleaning or maintenance products or substances could damage the
surface of the soap dispenser. For surface cleaning use ONLY soap and water, then wipe dry
with a clean cloth or towel. When cleaning bathroom tiles, the soap dispenser should be
protected from any splattering of harsh cleansers.
Disassemble of the soap pipe from the pump
The soap pipe can be disconnected from the soap pump by a simple slide & pull action. The
sliding ring of the quick connection fixation nipple on the pump should be pulled down. It
releases the open end of the soap pipe which can then be easily pulled out.
Clean the soap tank
Clean out the tank prior to refill by flushing warm water through the hoses and pump until
clean water is released from the spout. TIP: Keeping a spare tank will enable this process to
be completed in a speedy and hygienic manner with minimal downtime.
10
07220279
07210088
07222028
07100035
07100037
06530041
06522081
07100008
07100014