Download Print this page

Denali POWERHUB2 Installation Instructions

Power distribution module
Hide thumbs Also See for POWERHUB2:

Advertisement

Quick Links

DENALI
POWERHUB2
Power Distribution Module
ELC.00.30000
.............................................................
Features:
- 6 Mini ATC Fused circuits for a total of 30 amps
- Each circuit can be switched or unswitched
- Wiring harness included
- Adhesive Velcro included
PLEASE READ BEFORE INSTALLING
TWISTED THROTTLE products should be installed by a
qualified, experienced motorcycle technician. If you are
unsure of your ability to properly install a product, please
have the product installed by your local motorcycle
dealer. TWISTED THROTTLE takes no responsibility for
damages caused by improper installation.
Medium strength liquid thread-locker (i.e., "Locktite")
should be used to secure all screws, bolts, and nuts.
All screws, bolts, and nuts should be checked after
driving the first 30 miles (50 km) to ensure that all are
tightened to the proper torque.
All screws, bolts, and nuts, including all replacement
hardware provided by TWISTED THROTTLE should be
tightened to the torque specified in the OEM mainte-
nance manual for your motorcycle. If no torque
specifications are provided in the OEM maintenance
manual, the following torques may be used:
M5.........................................................3.5 ft-lbs (5 Nm)
M6.........................................................6.5 ft-lbs (9 Nm)
M8........................................................16 ft-lbs (22 Nm)
M10......................................................32 ft-lbs (43 Nm)
M12..................................................... 55 ft-lbs (75 Nm)
Kit Contents
Kit Contents
1
2
Power Hub
Qty.........................1
Qty.........................1
WARNING!
– When mounting electronics to the
front fender, forks, fairing, or handlebars, you must
turn the handlebars fully left and right and fully
compress & uncompress the suspension to ensure
the wires will not bind and have enough slack for
your motorcycle to operate properly.
3
Ring Terminal
Posi-Tap
Qty........................2
Twisted Throttle LLC
570 Nooseneck Hill Rd
Exeter, RI 02822
4
Velcro
Qty..................1 Set
Instruction Rev: 01
Phone: 401.284.4200
Fax: 401.223.6954
www.twistedthrottle.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the POWERHUB2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Denali POWERHUB2

  • Page 1 DENALI Kit Contents Kit Contents POWERHUB2 Power Hub Ring Terminal Velcro Power Distribution Module Posi-Tap ELC.00.30000 ............. Features: - 6 Mini ATC Fused circuits for a total of 30 amps - Each circuit can be switched or unswitched Qty......2 Qty....1 Set Qty......1...
  • Page 2 (3) Connecting your devices to the POWERHUB2. Notice that the POWERHUB2 has 6 circuits. Each circuit has an output bus, ground bus, and 2 fuse positions. To connect a device, start by inserting the proper amperage Mini ATC fuse into either the switched or constant fuse position in circuit 1.