Connecting the Speakers
GB
• Connect the satellite speakers, center speaker, and
subwoofer to the terminals on the rear panel using speaker
cords supplied.
• Insert the end of the speaker cord into the terminal.
Match the polarity (colors): Red (+) to red (+) and black (–)
to black (–).
1
Press and hold the terminal tab.
2
Insert the speaker cord.
3
Release your finger.
Subwoofer
Right rear speaker
R-REAR-L
WOOFER
CENTER
Center speaker
Right front speaker
•
for in-depth information about adjusting the delay time,
see "Speaker Settings" on page 32.
9
Center
speaker
Left front
Right front
speaker
speaker
Left rear
speaker
1
2
3
Left rear speaker
R-FRONT-L
IMPEDANCE
Left front speaker
Connecting Video to TV
Subwoofer
R-REAR-L
WOOFER
CENTER
Right rear
speaker
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
•
When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed
any signals.
R-FRONT-L
IMPEDANCE
TV
Composite
Component
S-Video
Video
Video
GB
10