Table of Contents
Advertisement
initialization
OUTPUT FORMAT
You can adjust the output format of the numeric values from the keypad.
You can select 4/8 bit Burst or 34bit Wiegand.
Adjust the format according to the controller receiving the keypad input.
1.
To change the output format, use the switch on the rear of the
product.
2.
See the table below to make adjustment as needed.
❖
Output Format
SW #1
ON
ON
OFF
OFF
M
All switches are defaulted to "OFF".
Before you change the output format, you must disconnected the power.
SW #2
Output Format of Card
ON
34bit Wiegand + RS-232
OFF
34bit Wiegand + RS-232
ON
34bit Wiegand + RS-232
OFF
34bit Wiegand + RS-232
ON
1
2
Output Format of Keypad
34bit Wiegand+RS-232
34bit Wiegand+RS-232
4 bit Burst
8 bit Burst (Default)
English11
Advertisement
Table of Contents
