Customizing Your EK7000 Pro Connecting to The iSmart DV APP Offloading Your Content Playing Back Your Content Deleting Videos and Photos on Your EK7000 Pro Reformatting Your Micro SD Card Maintenance Your Camera Maximizing Battery Life Battery Storage and Handling...
GETTING STARTED To Turn On Wi-Fi Welcome to your new EK7000 Pro. To capture video and photos, you need a micro SD card Turn on camera, press and hold Down button for three seconds to turn on Wi-Fi. (sold separately).
Page 5
Photo Mode Time Lapse Photo Mode Press Mode button once to switch to Photo Mode after you turn on camera. Press Mode button several times to switch to Time Lapse Photo Mode. In Photo Mode, press Shutter button, the camera takes a photo. In Time Lapse Photo Mode, press Shutter button, the camera takes a serial of photos at 2s / 3s / 5s / 10s / 20s / 30s / 60s intervals.
CUSTOMIZING YOUR EK7000 PRO SD card is full, the new files will cover the old one if loop recording is on. Note: Loop Recording is disabled when you select 4K 25fps or 2.7K 30fps video resolution. Video & Photo Setting 1.
Default setting is off. Default setting is 3 minutes. Turn on Continuous Lapse, this camera takes continuous lapse photo. Powers off your EK7000 Pro after a period of inactivity to save battery life. Camera Setting 9. Format: No / Yes 1.
4. Enter the password: 1234567890. 5. Open the app iSmart DV. 6. Tap ‘ A dd new camera’. Cancel Add new camera 7. Tap ‘Wi-Fi Connect’. When you already connect to camera by Wi-Fi Add New Camera AKASO_EK7000Pro Wi-Fi Connect OFFLOADING YOUR CONTENT For new camera, and the camera supports bluetooth low energy.
TV. With this method, playback resolution depends on the resolution of the device and its ability to play back that resolution. VIEWING VIDEOS AND PHOTOS ON YOUR EK7000 Pro DELETING VIDEOS AND PHOTOS ON YOUR EK7000 PRO 1.
BATTERY STORAGE AND HANDLING REFORMATTING YOUR MICROSD CARD To keep your micro SD card in good condition, reformat it on a regular basis. Reformatting The camera contains sensitive components, including the battery. Avoid exposing your erases all of your content, so be sure to offload your photos and videos first. camera to very cold or very hot temperatures.
Page 11
To start recording: 3. Lift the PCB board and slide out the battery, as shown in the picture. Press the Grey Video Button. The camera will emit one beep and the camera light will Note: Do NOT rotate the PCB board to avoid reversing the camera and video button functions. flash while recording.
MOUNTING YOUR CAMERA Attach your camera to helmets, gear and equipment. CONTACT US For any inquiries, issues or comments concerining our products, please send E-mail to the address below or call us. We will respond as soon as possible. E-mail: cs@akasotech.com US customer service line: (301)670-7335...
Need help?
Do you have a question about the EK7000 and is the answer not in the manual?
Questions and answers