Panasonic AMK3000P22 Installation Manual page 8

<For 7.5kW or below>
AP
AO
AN
1 Operation panel unit
2 Waning label
3 Enlosure
4 Rating nameplate(※1)
5 Heat sink
6 Inlet hole for main circuit wire
7 Inlet hole for control wire
8 Port for connecting option unit(RJ45)
9 Terminal block for control circuit (signal input/output) KInternal component cooling fan (※3)
A Terminal block for control circuit (relay output)
AK Terminal block for main circuit
AL Ground terminal
Check that the rating nameplate confirms to your order.
※1
Models less than 0.75 kW are not equipped with cooling fan (equipped with item
※2
18 and 20 ).
11kW and 15kW models are equipped with internal cooling fans (item 21, 22
※3
and 23).
5.5kW and 7.5kW models are equipped with 2 fans.
※4
7
BT
AS
※4
AR
※4
AP
AN
AO
AQ
<For 11kW/15kW>
AR
BK
BL
AP
AM Mounting holes
AN Terminal cover
AO Cover for option unit connection
AP Fixing screw for terminal casing
AQ Terminal casing for main circuit
AR Cover of connector for cooling fan(※2)
AS Cooling fan(※2)
 Casing of Cooling fan(※2)
LCasing of internal component cooling fan (※3)
MFixing screw for casing of internal component cooling fan (※3)
N Wiring nameplate
BT
AS
BM
BN
AQ