Stopping Workout Measurement And Saving The Data - Epson ProSense 307 Reviewer's Manual

Note: If you must start a workout before GPS location is complete, press the
Your watch continues locating and begins measuring your workout with the built-in stride sensor.
The watch will not record some measurements that require GPS signals, such as your workout
route, until GPS location is complete.
3. Press the
If your watch displays the Locating GPS Failed message, GPS location has failed:
Move to an outdoor area with no overhead obstructions and press the
Parent topic:

Stopping Workout Measurement and Saving the Data

You can save up to 248 sessions of workout data.
Note: You can save up to 99 hours for each lap. If you exceed this time, workout measurement stops.
1. At the Measurement screen, press the
Start/Stop button to start workout measurement.
Measuring Workouts
Start/Stop button to pause workout measurement.
11
Start/Stop button.
Back button to try again.