Timers/Sensors; Model Time/Reset Timers At Power Up; Creating A New Timer; Deleting A Timer - Jeti Duplex DC16 User Manual

9.4. Timers/Sensors

- Set up of Timers and Telemetry Sensors
9.4.1 Timers
The DC/DS-16 allows you to simultaneously use up to 10 different
timers. This is useful to separately track motor run times, individual
lap times, total flight time or just about anything else you could
want. You can also name each of the timers. Once you create a timer
it is displayed in its own box on the desktop screen. The timer values
are stored in each model's setup. The „Timers" menu displays a list
of all of the timers you have created.
computer radio control system
1.

Model Time/Reset Timers at Power Up

By pressing F1() button you can choose which timers will be reset
after turning on the TX or after selecting the model. By default, all
timers with specified Short Reset option are cleared. In addition, it is
possible to have all timers cleared or none. This option is model
specific. The model time runs incrementally during flight (after
pressing F(4) Start button on main screen or after starting any timer).
Button F(3) clears the model time.
It is possible to show the model time on the main screen
„Timers/Sensors->Displayed Telemetry".
2.

Creating a new Timer

From the „Main Menu > Timers/Sensors > Timers" menu, press the
„F2(Add)" button to create a new timer.
3.

Deleting a Timer

Use the „F3(Del.)" button to delete the selected timer.
4. Editing Timer Settings
Use either the „F3(Edit)" button or the „3D button" to enter the
„Timer Detail" menu. Then use the „3D button" to select and edit
the timer settings.
EN