NSTALLATION UIDE IAGARA Power Wiring The JENEsys Edge 534 can be powered by wiring to a dedicated Class 2, 24 Vac transformer, or to a 24 Vdc power (black) source. As shown in Figure 1, the JENEsys Edge 534’s 3-position power connector is located at the top corner of the unit.
Onyxx Representation ® In the Niagara station interface, the JENEsys Edge 534 appears as one Onyxx IO Device, where the “DevicePath” property is appended with a six-digit number. See Figure 8. Upon discovery, if the JENEsys Edge 534 has 1-7 Onyxx XM 34IOs daisy-chained, the devices will show up as onyxx_######.