Page 4
Please read these operating instructions carefully before putting the refrigeration unit into operation. If you later sell or dispose of it, please ensure that the new owner receives these operating instructions. Thank you for choosing our appliance. We are sure it will provide you with trouble-free use. In the following, we would like to familiarise you with some symbols, which we bring to your attention to ensure the safe and efficient operation of the appliance: source of danger, in event of improper operation...
ONTENT ONTENT 1. Unpacking 2. View of the appliance 3. Cleaning 4. Positioning the appliance 5. Using the appliance 5.1. From electrical mains 5.2. From vehicle battery 5.3. From bottled gas 6. Ice-making 7. Useful suggestions 8. Defrosting, cleaning and maintenance 9.
1. Unpacking After removal from the cardboard packaging, make sure the appliance is not damaged. If you find damage to the appliance resulting from transport, report it immediately to the transportation firm. 2. View of the appliance Figure 1. 1. insulated casing 3.
3. Cleaning Clean both the inside and outside of the appliance before putting it into use. To do so, use a soft towel, lukewarm water and a non- abrasive detergent. Ensure water does not enter the rear cover grille or the control elements. Afterwards, wipe the appliance with a clean towel and cleanwater, and then wipe it dry.
5.2. Operating from vehicle battery Make sure the voltage shown on the data plate of the appliance matches the voltage of the vehicle battery (12V or 24V). 12V DC voltage appliances are equipped with connectors that can be plugged into cigarette lighters (Figure 3.).
6. Ice-making Fill the ice-tray with drinking water to within 4/5 from the top and cover with lid. Wipe off any drops of water which may be on the tray and lid to prevent freezing together and place in the cooler on the refrigerating unit. Ice will be made more quickly when the thermostat knob (for electric operation) or regulating knob (for liquid gas operation) is set to MAX for a short time.
9. Customer service 10.1. Connecting to electrical mains Make sure no other energy source is connected (gas, Before notifying customer service, please check the 12V). following: The appliance may only be operated from Are location and ventilation satisfactory? nominal voltage mains as shown on the data Is the appliance level? plate.
10.2. Connecting to vehicle power 10.4. Connection of gas supply source The correct connection of the fridge has to be carried out by a skilled specialist. Note the Make sure no other energy source is connected (gas, particularly valid national rules for usage of 230V).
seal Figure 6. For your safety: Do not check for leaks with a naked flame! Do not smoke while checking for leaks! 11. Environmental protection information Ammonia (natural hydrogen and nitrogen compound) is used as refrigerant agent in the cooling unit. The ozone-friendly cyclopentane is used as a blowing agent for the PU foam insulation.
Page 15
Atlantic Product Code: E0014 3 Way chest fridge Instruction Version: 3 Warranty Form • Please fill out this warranty form before you return to your dealer. If you do not then you will be required to fill this form out at your dealer. Your name: Your contact: (Email, phone or address)
Need help?
Do you have a question about the Atlantic E0014 and is the answer not in the manual?
Questions and answers