LOCATION OF CONTROLS 9 10 1) POWER KNOB 11) OPEN / CLOSE 2) POWER INDICATOR 12) CD COMPARTMENT 3) REPEAT FUNCTION 13) PHONE JACK 4) PROGRAM FUNCTION 14) FUNCTION KNOB 5) PLAY / PAUSE 15) VOLUME KNOB 6) MONO / ST. 16) TUNING KNOB 7) FM STEREO INDICATOR 17) FM ANTENNA...
CONNECTIONS POWER CONNECTION HEADPHONE JACK (PHONES) Connect the power cord to AC Out- This unit will accept stereo headphones let only. (not included) with a 1/8” plug and an impedance of 32 ohms or greater. SPEAKER JACK Connect the SPEAKER PLUGS to the The speakers are automatically dis- EXTERNAL SPEAKER JACKS(20) connected when headphones are connected...
RADIO OPERATION FM & FM-STEREO RECEPTION Set the FUNCTION Knob(14) at FM position. 1) Turn the unit “ON” using the POWER Programs are received in mono mode. When Knob(1). 2) Select the desired radio band by selecting Stereo signals are weak, it is preferable to FUNCTION Knob(14) to AM or FM position.
OPERATION 1) Set the FUNCTION Knob(14) to CD position. Open the CD Compartment(12) by pressing the OPEN/CLOSE Button(11). Put a CD into the compartment and close the CD door. 2) Focus search is performed if disc is inside.Total no.of tracks is read. PLAY/PAUSE MODE 1) If PLAY/PAUSE Knob(5) is pressed during STOP mode, the first track will be played and “01”...
TROUBLE SHOOTING Power switch on, but no power Tuner poor FM reception * Check power to wall plug. * Unravel and fully extend FM wire antenna * Check AC cord connection to wall for best reception. plug. Power Indicator is on, but no sound from speaker * Check Function selector.
Need help?
Do you have a question about the PL 710 and is the answer not in the manual?
Questions and answers