GLD Products STORMSTRIKE SPACE SAVING BILLIARD TABLE Replacement Parts Manual page 10

GLD Products
STEPS TO ATTACH THE WHEELS
1. Place one of the wheels (#8) on an axle bolt (#19).
2. Push the assembly thru the hole on the "L" shaped leg (#2).
3. Place a second wheel (#8) on the axle bolt (#19). Use an axle nut (#13) to secure the
wheel (#8).
Note: The axle nut (#13) has a rounded edge on one side. The opposite side should screw
onto the axle bolt (#19) ! rst. The axle nut (#13) will feel tight when assembled to the
axle bolt (#19). Tighten only to secure and stabilize the wheels. The wheels must roll
freely.
4. Repeat for the second "L" shaped leg.
Step 3
2X
1-800-225-7593
www.gldproducts.com
19
8
9
Space Saving Billiard Table
10
Item 64-6033