Advertisement
Table of Contents
WINDSOR
MAINTENANCE
86393100
04) Plug in battery
S
C
aber
utter
01)
Dump & clean
recovery tank
05) Remove dome
(Air out recovery tank)
S
erieS
02) Remove squeegee, rinse,
inspect blades for wear/
tear. (if damaged or worn
flip squeegee blade)
06) Turn off machine
03) Empty solution tank
07) Wipe down outside
of tank
Advertisement
Table of Contents
Related Manuals for Windsor Saber Cutter series
Summary of Contents for Windsor Saber Cutter series
- Page 1 WINDSOR aber utter erieS 02) Remove squeegee, rinse, 03) Empty solution tank Dump & clean recovery tank inspect blades for wear/ tear. (if damaged or worn MAINTENANCE flip squeegee blade) 86393100 04) Plug in battery 05) Remove dome 06) Turn off machine...
- Page 2 WINDSOR WINDSOR aber utter erieS 01) Inspect squeegee blade 02) Inspect Pads 03) Fill solution tank for wear or torn blades (Recommended changing at 1/4” thickness) MAINTENANCE OPERATION 00000000 86393100 04) Turn on machine 07) Lower Scrub Deck (Make sure pads are wet...
- Page 3 WINDSOR WINDSOR aber utter erieS 08) Lower squeegee arm 09) Turn on vacuum and Press 10) Adjust speed to desired accelerator handles pace (Green) MAINTENANCE OPERATION 00000000 86393100 11) REVERSE: Hold white 12) TURNING SCRUBBER 14) DEEP SCRUB DOUBLE SCRUB: (Used for...
Need help?
Do you have a question about the Saber Cutter series and is the answer not in the manual?
Questions and answers