OEM Tools MANUAL FLUID EXTRACTOR Operating Instructions And Parts Manual

Hide thumbs

Table Of Contents

Operating Instructions and Parts Manual

Please read and save these instructions. Read through this owner's manual carefully before using product. Protect

yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions

could result in personal injury and/or damage to product or property. Please retain instructions for future reference.

FOR CUSTOMER SERVICE

Technical Question?

CALL 1-866-458-2472

customerservice@oem-tools.com

UNPACKING

After unpacking unit, inspect carefully

for any damage that may have occurred

during transit. Check for loose, missing, or

damaged parts. If any damage is observed,

a shipping damage claim must be filed with

carrier. Do not use Manual Fluid Extractor

if broken, bent, cracked or damaged parts

(including labels) are noted. Any Manual

Fluid Extractor that appears damaged in

any way, operates abnormally or is missing

parts should be removed from service

immediately. If you suspect that the Manual

Fluid Extractor was subjected to a shock

load (a load that was dropped suddenly,

unexpectedly, etc.) immediately discontinue

use until it has been checked by a factory

authorized service center.

Explanation of Safety Signal Words

WARNING

: Indicates a potentially hazardous

CAUTION

: Indicates a potentially hazardous

CAUTION

: Used without the safety alert symbol indicates a potentially hazardous situation

Notes

: Provide clarity and helpful information.

WARNING

The following safety information is provided as guidelines to help you operate your Manual Fluid Extractor under

the safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety

or safe handling instructions are not known or not followed. The following safety instructions are to provide the

user with the information necessary for safe use and operation. Please read and retain these instructions for the

continued safe use of your service system. Failure to follow instructions listed below may result in serious injury.

In addition, make certain that anyone that uses the equipment understands and follows these safety instructions

as well.

07/14

situation which, if not avoided, could result in death or serious injury.

which, if not avoided, may result in property damage.

Manual Fluid Extractor

24397

Table of Contents

Need help?

Do you have a question about the MANUAL FLUID EXTRACTOR and is the answer not in the manual?

Questions and answers

Ken McCartney

March 18, 2025

the tool will not pump. there seems to be back pressure. this happened after the device automatically shut down because it filled to the top

1 comments:

Jeremy

April 19, 2025

@Ken McCartney you need to release the vacuum plug at the base of the handle and then re insert it.

Summary of Contents for OEM Tools MANUAL FLUID EXTRACTOR

Page 1 : Provide clarity and helpful information. WARNING The following safety information is provided as guidelines to help you operate your Manual Fluid Extractor under the safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed.
Page 2 Operating Instructions and Parts Manual 24397 MANUAL FLUID EXTRACTOR Thank you very much for choosing an OEMTOOLS 7. Don’t overreach. Keep proper footing and balance Product! at all times when operating this tool. 8. Check for damage. Check your tool regularly. If For future reference, please complete the owner’s...
Page 3 • Avoid accidental fire and/or explosion. Do not smoke PURPOSE near engine fuel and battery components. The 24397 Manual Fluid Extractor is designed for the • Never remove the cap from the radiator or expansion extraction of all types of engine, transmission and tank while the engine is at operating temperature.
Page 4 Operating Instructions and Parts Manual 24397 MANUAL FLUID EXTRACTOR Figure Description Quantity Main Suction Pump Handle 24397-1 Tube 24397-2 Suction Tube 24397-3 Dipstick Tube Suction Tube 24397-4 Pump Handle 24397-5 Reservoir Dipstick Tube 24397-6 Float Assembly (Not Shown) 24397-7 Base...
Page 5 Operating Instructions and Parts Manual 24397 MANUAL FLUID EXTRACTOR WARNING Always wear safety glasses and gloves! OPERATING INSTRUCTIONS • This equipment is intended only for professional use by personnel trained in performing the service functions for which it is has been designed •...
Page 6 Operating Instructions and Parts Manual 24397 MANUAL FLUID EXTRACTOR WARNING EXTRACTING TRANSMISSION FLUID THROUGH THE DIPSTICK TUBE In some applications, this may require jacking or lifting the vehicle. Use appropriate safety stands to avoid serious or fatal injury. 1. Operate the vehicle to warm the transmission fluid to a normal operating temperature.
Page 7 Operating Instructions and Parts Manual 24397 MANUAL FLUID EXTRACTOR 8. Remove the reservoir adapter from the reservoir; pour the used coolant from the reservoir into a suitable container, then dispose of the coolant in an appropriate manner. NOTE If no vacuum can be created after emptying the Reservoir, the user may need to remove the Red Vacuum Release Plug below the Pump Handle and reinstall it.
Page 8 MANUAL FLUID EXTRACTOR MAINTENANCE 1. Always store the Manual Fluid Extractor in a well-protected area where it will not be exposed to inclement weather, corrosive vapors, abrasive dust, or any other harmful elements. 2. Keep the Manual Fluid Extractor clean for better and safer performance.
Page 9 Operating Instructions and Parts Manual 24397 MANUAL FLUID EXTRACTOR OEMTOOLS™ ONE YEAR LIMITED WARRANTY Please read the following carefully OEM and/or its distributors have provided the parts list and assembly diagram as a reference only. Neither OEM and/or its distributors make any representation or warranty of any kind to the buyer and/or user of this tool that he or she is qualified to do any repairs or replace any parts of this product.