Contents Parts Included.............3 Setting up your Nomad II Compressor ....... 4 Operation Instructions: 110V or 220V outlet ....5-6 Operation Instruction: 12V Battery ......7-8 Operation the Lights............9 Installing the Foot Extensions........9 Lubricating your Nomad II Compressor ....10 Output Air Filter Replacement ........10 Purging the Lubrication System........
Setting up your Nomad II Compressor Your Nomad II comes pre-set to operate from an 110V outlet. Should you choose to use the unit with a 220V outlet, complete the following steps. 1) The cover must be removed. Before removing, make sure the compressor is not connected to an active electrical outlet.
Operation Instruction: 110V or 220V outlet 1) Plug the power cord into the Nomad II (fig. 1). DO NOT plug the three prong connector into an active wall outlet yet. 2) Plug the 110V three prong connector into your wall outlet (fig.
Page 6
If you DO NOT bleed the pressure in the line and just depress the ON/OFF button to resume filling, the Nomad II will automatically stop after a few seconds of running.
Operating the Lights The blue lighting on the underside of your Nomad II will only come on once the POWER/RESET button has been depressed, turning the unit on. 1) Locate the red ON/OFF switch in the middle of the LED light panel on the underside of the unit.
28 during operation, it is necessary to apply silicone oil. The Nomad II will automatically shut off if the LOAD gauge exceeds 29. IMPORTANT: Use only silicone oil to lubricate the compressor. The use of any other oil/lubricant is not recommended and may void your warranty.
2) If fill times increase without any signs of leaking. 3) Once every 20-30 fills. Turn on the Nomad II compressor and open the Moisture Release Valve on the underside of the unit by turning the knurled screw counter-clockwise. Add 2-3 drops of silicone oil into the lubrication hole repeatedly in 30 second intervals, six times.
Warranty One Year Limited Warranty Your Air Venturi Compressor is manufactured to the highest possible standards, using quality materials to give a lifetime of service. In the unlikely event that there are any defects in materials or workmanship in the first twelve (12) months after retail purchase, we will repair or replace the defective items under warranty.
Need help?
Do you have a question about the Nomad II and is the answer not in the manual?
Questions and answers