Samsung SyncMaster 460P User Manual page 40

Adjusting Your Monitor.
Connecting to a Computer
Connecting DTV Set Top Box
Connecting the LAN Cable
1. Connecting to a Computer
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Trun on power switch.
2. There are 3 ways to connect the signal cable to your monitor.
Choose one of the followings :
2-1. Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the 15-pin, RGB port on the back of your monitor.
2-2. Using the DVI (Digital) connector on the video card.
Connect the DVI Cable to the DVI(HDCP) port on the back of your monitor.
2-3. Using the BNC (Analog) connector on the video card.
Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V port on the back of your
Monitor and the 15 pin D-sub Port on the computer.
| Connecting to a VCR | Connecting to a DVD Player
| Connecting Speakers
| Connecting USB | Connecting the Digital Audio System
| Connecting to an Audio System
| Connecting a Camcorder