Table of Contents
Advertisement
The eZLO hub provides current information provided by the installed multisensor. In the web app, go to
the room to where the sensor is assigned and select it. A window similar to this one will be displayed
The multisensor information in eZLO app for Aeon Labs Multisensor
The information window shows the current data your multisensor can collect. You can also press the
Device Logs button to see previously collected information, and see the battery indicator to know when
it's time to switch cells.
How to perform Z-Wave Network Reconstruction
The Z-Wave technology allows automatic network reconstruction if you don't see a previously connected
Z-Wave device in your devices list, or for other maintenance reasons.
To perform a reconstruction:
1. In the eZLO web app select your eZLO hub and click
The A dd Device menu is displayed.
2. Select Z -Wave to filter out only Z-Wave devices.
3. Open the Z -Wave Settings menu.
4. Click R ediscrover .
Your eZLO hub refreshes the connections of all Z-Wave devices - both between each other and
the hub.
After the reconstruction is finished successfully, a message is displayed.
Appendix 2. Terminology
59
on the sidebar.
Advertisement
Table of Contents
Need help?
Do you have a question about the EZ001-1 and is the answer not in the manual?
Questions and answers