Advertisement
Adding the Keypad
Start Go to Settings > free@home radio > Search for wireless devices
The SysAP will now search for the Keypad.
Note: The Keypad can only be found if the search starts within 30 minutes after the Keypad
was connected to power. If 30 minutes has elapsed, the user must turn the power OFF and
back ON again to restart the 30 minutes.
The Keypad will be found automatically and will be inserted into the configuration software.
Please wait until the Keypad configuration is read. This may take up to 10 minutes.
STEP 3: Add the Keypad to the floor plan
A. Go To "Devices".
B. Click on "Sensors".
C. Drag the Keypad symbol into the floor plan.
D. Choose the device from the list.
Note: The device can be identified by its serial number or 3-digit code.
E. A new symbol will appear in the floor plan corresponding to the Keypad.
│5
Product Manual 2CQA 100 007 B0001 │ 2018-09-28
Advertisement
