Hints And Tips; Fault Codes - Kenwood KDW60X18 Installation Instructions Manual

hints and tips

• Repairs should only be carried out by a qualified technician in strict accordance with
current local and national safety regulations. Unauthorised or incorrect repairs could
cause personal injury or damage to the unit.
• Before calling for service, please refer to Hints and Tips to solve some general problems
by yourself.

fault codes

Indicator light flashes
P1 P2 P3
Kenwood Freestanding Dishwasher KDW60T18/X18 Manual.indd 33
Possible Causes
P4 P5
Inadequate water
supply
Shut off valve fault
The waste water
in the machine
cannot be
discharged
Intended water
temperature could
not be reached
faulty heater
Alarm is active
against water
overflow
Faulty electronic
card
Overheating
Faulty heater
sensor
Remedy
• Make sure the water input tap is totally
open and that there is no water cut.
• Close the water input tap, separate the
water input hose from the tap and clean
the filter at the connection end of the
hose.
• Restart your machine, contact your
service
agent if the error resumes.
• Close the tap.
• Contact the service.
• Water discharge hose is clogged.
• The filters of your machine might be
clogged.
• Power off-on your machine and activate
the program cancellation command.
• If the error continues, contact your
service agent.
• Contact your service agent.
• Power off your machine and close the
tap.
• Contact your service agent.
• Contact your service agent.
• Contact your service agent.
• Contact your service agent.
33
07/06/2018 15:59