Page 1
Brookfield Viscosity Liquid Bath K34710, K34711, K34712 Operation and Instruction Manual REV A Koehler Instrument Company, Inc. 1595 Sycamore Avenue • Bohemia, New York 11716-1796 • USA Toll Free: 1-800-878-9070 (US only) • Tel: +1 631 589 3800 • Fax: +1 631 589 3815 http://www.koehlerinstrument.com •...
Page 3
CERTIFICATE OF CONFORMANCE Low Temperature Brookfield Viscosity Bath, BVS3000 K34710, K34711, K34712 This certificate verifies that part numbers K34710, K34711, K34712 Low Temperature Brookfield Viscosity Bath, were manufactured in conformance with the applicable standards set forth in this certification. Specifications:...
ISO Publication requirements and provide you with the best solutions. You can depend on Koehler for a full ISO 2962 range of accurate and reliable instrumentation as well as support for your laboratory testing...
K34710, K34711, K34712 Brookfield Viscosity Liquid Bath Operation and Instruction Manual Instrument Specifications 2 Safety Information and Warnings Safety Considerations. this Model: K34710 equipment may involve hazardous materials and K34711 operations. This manual does not purport to K34712 address all of the safety problems associated Electrical with the use of this equipment.
K34710, K34711, K34712 Brookfield Viscosity Liquid Bath Operation and Instruction Manual 3 Unpacking & Installation Unpacking Carefully unpack and place the instrument and The instruction for preparing this equipment accessories in a secure location. Use extra care assumes that the user is aware of the contents while unpacking the Borosilicate glass cylinders.
K34710, K34711, K34712 Brookfield Viscosity Liquid Bath Operation and Instruction Manual Leveling the Brookfield Viscometer: It is Instrument Descriptions essential that the viscometer be level for proper operation. A level is located at the top of the viscometer. Loosening the left thumb screw allows the viscometer to be leveled, or the use of the leveling feet attached to the stand.
K34710, K34711, K34712 Brookfield Viscosity Liquid Bath Operation and Instruction Manual Setting the Temperature. Set the desired Temperature Controller Operation operating temperature by adjusting the set point with the up and down keys. The set point will be displayed in the lower green Set...
K34710, K34711, K34712 Brookfield Viscosity Liquid Bath Operation and Instruction Manual a. Set the operating temperature to the Maintenance desired setting. WARNING: Disconnect power to the unit b. Press the up and down arrow buttons before servicing to avoid exposure to high simultaneously for about 5 seconds.
Operation and Instruction Manual Service 10 Warranty Under normal operating conditions and with We, at Koehler, would like to thank you for routine maintenance, the Koehler Programmable your equipment purchase, which is protected by Brookfield Viscosity Liquid Bath should not the following warranty.
Need help?
Do you have a question about the K34710 and is the answer not in the manual?
Questions and answers