Wps Pairing - Genexis Pulse Quick Installation Manual

Status
Internet
2.4GHz
5GHz
WPS

WPS pairing

Initiate WPS pairing on your Pulse
›
Press and hold the WPS button on your
Pulse until the LEDs start blinking.
›
After approximately 30 seconds the WPS
LED should be the only LED blinking.
›
The device is now ready to pair with
your router.
Status
Internet
2.4GHz button
5GHz button
WPS button
Initiate WPS pairing on your router
›
Press the WPS button on your router.
You may need to consult your router's
manual on how to initiate WPS on
your router.
›
After approximately 1 minute the
internet LED on your Pulse should turn
yellow and the WPS LED should turn off.
›
Your Pulse is now synchronized with your
home network.
If the internet LED turns red or off, retry to
initiate WPS pairing on your Pulse and on
your router.