Do you have a question about the LT-110D and is the answer not in the manual?
Questions and answers
Frank
February 4, 2025
My led lights don’t turn on
1 comments:
Mr. Anderson
February 10, 2025
The LED lights on the Omelon LT-110D may not turn on due to several possible reasons:
1. Power Supply Issue – Ensure the device is properly connected to a power source with the correct input voltage (100-240VAC, 50/60Hz). 2. Timer Settings – Check if the time selection is set correctly (1-90 minutes). 3. Brightness Level – Make sure the brightness intensity (1-9 levels) is not set too low. 4. Mode Selection – Verify that an appropriate output mode (M1, M2, M3, M4) is selected. 5. Device Malfunction – If the device is still not working, there may be an internal issue, and professional maintenance is required.
If none of these steps resolve the issue, contact the manufacturer for assistance.
This answer is automatically generated
Irma
March 20, 2025
How many volts should the power supply be. I lost mine. The input and output voltage?
Summary of Contents for Omelon LT-110D
Page 1
LT-110D 4 Colors Led PDT lamp USER MANUAL...
Page 2
Warning Dear user: Thanks for choosing Mychway company’s product, in order to fully make use of the products, we sincerely suggest follow: ◆Please read the instruction in detail and keep it well for further reading and consulting. ◆Please follow the instruction to fit and operate the machine correctly. ◆Please do not remove and change any accessories of the machine.
Page 3
Generaly Introduction WHAT CAN THIS LED DO FOR U? Skin LED light has shown to be effective for the treatment of several aspects of the skin aging.The treatment of several aspects of the skin aging,multiple studies have demonstrated improvement of fine wrinkles,mottled hyperpigmentation ,tactile tactile roughness and sallowness,these results are supported by both collagen production and increase proliferation What Can this LED do for u?
Page 4
a.Easy to operate with full touch screen (3 programs included). b. Maximum Power Control Program -15 minutes. c. Smart design to place the handles on the case. d. Non invasive treatment and totally safe. e. Frequency adjustable on the screen to re-adjust the handle. f.
Page 5
3.Yellow light Improving cell's oxygen alternation function,promoting mirco circulation, decomposing pigment, promoting lymph posion discharge, curing skin roughness, red spots and deficient circulations. 4.Green light Effective reduction of melanin cell,decreased pigment formation,adjustment of skin gland function, adjustment of skin gland function, reduction of grease gland excitation.
Page 6
3. Choose color treatment. Red: press red botton to choose the function of red light. Function: A. Stimulates us and always appears when the circulation is in full swing. Red, the warmest color, symbolizes life and fills us with strength and energy. B.
Page 7
D. Useful to sensitive, oily skin and pimples. E. Help to Slimming Yellow: press yellow botton to choose the function of yellow light. Red + blue: Press RED then press blue. This mix light will combine with function of red and blue. 4.
Need help?
Do you have a question about the LT-110D and is the answer not in the manual?
Questions and answers
My led lights don’t turn on
The LED lights on the Omelon LT-110D may not turn on due to several possible reasons:
1. Power Supply Issue – Ensure the device is properly connected to a power source with the correct input voltage (100-240VAC, 50/60Hz).
2. Timer Settings – Check if the time selection is set correctly (1-90 minutes).
3. Brightness Level – Make sure the brightness intensity (1-9 levels) is not set too low.
4. Mode Selection – Verify that an appropriate output mode (M1, M2, M3, M4) is selected.
5. Device Malfunction – If the device is still not working, there may be an internal issue, and professional maintenance is required.
If none of these steps resolve the issue, contact the manufacturer for assistance.
This answer is automatically generated
How many volts should the power supply be. I lost mine. The input and output voltage?