CÂMERA
To use the camera simply tap the Camera icon,
camcorder mode, change the mode to Camcorder on the icon on the right
side of the screen, to take a photo or start recording, tap the circle on the
side of the screen, the pictures were stored in the internal memory device
and can be accessed through the application Gallery.
* FOR MORE INFORMATION, PLEASE REFER TO THE MANUAL
USER AVAILABLE IN MEMORY OF YOUR TABLET OR ACCESS:
multilaser
www.
.com.br
3G CONNECTION (EXTERNAL)
The Tablet supports 3G modem, so you can use a mobile phone sim
card with 3G data plan to surf the internet when out of range of a Wi-Fi
network.
, to select the
To make the connection, turn off Wi-Fi on the settings menu, then turn off
the tablet and follow instructions below with the tablet off.
.
Make sure that the 3G modem is compatible with this tablet, then insert
a SIM card with data plan on 3G modem.
The connection may be interrupted if the
tablet comes into Stand By mode.
• To avoid this, increase the
Turn off Wi-fi connection
Standby time of you device.
• Click Menu> Settings> Dis-
play> Sleep, and then select
the desired time.
(It is desirable to select
30min. If you want to put
the device in Stand By mode
at any time, you can do so
by pressing the On. / Off.,
Insert the SIM Card
Located on the side of the
on the 3G Modem
tablet.)
*Modelo de modem compatíveis: Huawei E303, E173-s1, E173-s3 e Olicard 160
WARRANTY TERMS
Acquire an USB OTG adaptor with the input as shown in the Image 1 to
connect the modem on the tablet, then isert the the OTG in the Mini Usb
input, image 2.
This warranty does not cover any deffect for bad use or natural wear, or
Wait for a few seconds until the device recognizes the 3G modem and
even IF it is not used according to our guidelines.
your operator network. The connection may be concluded as soon as the
This warranty does not cover any deffct caused by use of non original or
non compatible peripherals and third party software installation.
In case this product has a factory defect, since you can prove it, Multilaser
icon
appears at the right bottom side of the sreen.
is compromises to fix it or replace your product.
The below cases are not covered by this warranty:
The connection time may be extended for few a minutes, it depends on
• Natural use
your operator signal intensity.
• Damages caused by liquids, high temperature (Hot or cold)
• Oxidation or fungus
In case the connection does not occur automatically, go to menu
• Shocks
Settings>More...>Mobile Network Settings> Access Point Names, then
• Impacts
choose the first option. After this procedure your tablet will be ready to
• Damages caused t LCD because of bad use, pressing, shock or hu-
surf the internet.
midity
This product is warranty covered for the period of 12 months and the
accessories that are included in this kit are covered for 3 months from
the acquisition day on.
Image 1
SAC
Image 2
SAC: www.
multilaser.com.b
This certified is only valid under the
presentation of the purchase receipt.
r
Quick Guide
M7 . Tablet
Need help?
Do you have a question about the M7 and is the answer not in the manual?
Questions and answers