Table of Contents
Advertisement
7.7 Work top
To remove the work top, first remove the
screws which secure the top to the rear
edge of the appliance.
Slide the top towards the rear.
7.8 Control panel
Remove the container and release the screws
and to the cover holder.
Open the door, release the front cover from the housing, and turn it forwards. Unplug the cabling of the display
electronics. The light duct becomes accessible. The display module and the locking bolt can be released from
the cover if required.
7.9 Main elektronic
Remove the operating panel.
Ensure that the program selector is set to "0" (Off).
Remove the grooved pin (1) from the program selector.
Press against the locking hook (2) of the protective housing,
release the protective housing from the electronic system
support.
Disconnect the cable connector (3) from
the electronics system.
06.2005 R.Kurzke
with which the front cover is fastened to the container tank
1
- 18 -
3
2
599 522 797 EN
Hide quick links:
Advertisement
Table of Contents
