MCONFORT E1200 Security warnings: This equipment can not be used by children or people with impaired mental faculties if it is not under supervision or who have been instructed in the use of the equipment in a safe way and understand the dangers in which it can derive a bad use of it. Children should not play with the equipment.
I. PRODUCT FEATURES - COOL: It cycles the water to blow cool air. It can lower the surrounding temperature and provide you a comfortable environment in hot summer. - HUMIDIFIER: It humidifies the air to avoid skin dry and spall in winter. - IONIZER: It releases negative ions to freshen the air and care health.
MCONFORT E1200 III. ACCESSORIES LIST LIST ACCESORY NAME QUANTITY (PCS) REMOTE CONTROLLER INSTRUCTION MANUAL CASTER WITH SKID CASTER WITHOUT SKID CASTER WRENCH IV. TECHNICAL PARAMETERS MODEL MCONFORT E1200 RATINGS 220-240V/50Hz 130W MAX Air Flow Consumption 1600m³/h MAX Water Volume Net Weight...
V. OPERATION INSTRUCTION 1-. Pull the unit outwards from the carton and place it on a solid hot-proof horizontal surface. 2-. Check if the accesories are complete, same as the accesories list. 3-. Place the unit on a solid hot-proof horizontal surface. Take out the casters and caster wrench to assemble.
MCONFORT E1200 VI. CONTROL PANEL Remote controller control panel with same function as the unit control panel. Insert the plug pin into a wall socket and turn on the power switch which is at the side of the unit. A small beep sound can be heard and the power indicator will be on.
Page 7
-MODE: Press this button to select desired wind mode, NATURE - SLEEP - NORMLA - NATURE, in turn. The corresponding wind mode indicator will be displayed. (1) NORMAL: It works as per the selected fan speed (HIGH, MID, LOW) (2) NATURE: It works as per the presetted computer program, imitating the natural irregularly wind.
MCONFORT E1200 VII. IMPORTANT SAFEGUARDS 1-. READ ALL INSTRUCTIONS BEFORE USING. 2-. Do NOT open and repair the unit by any unqualifield person. 3-. To protect against electric shock, keep the unit dry. Do not immerse in water or any other liquid.
22-. Do not use the unit when the power cord is damaged. Send to service center for repair. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. 23-.Keep the unit out of children´s reach.
MCONFORT E1200 -Cleaning the body. 1-. Clean the body with a little mild detergent on a soft cloth. NOTE: Unplug from outlet before cleaning. No water on the control panel. IX. CIRCUIT DIAGRAM...
X. TROUBLESHOOTING If there is something wrong during operation. It may not be the unit´s problem. You may check against the following list before send for repair. PROBLEMS SOLUTIONS POSSIBLE REASONS Not working 1-. The plug is not securely inserted 1-.
Need help?
Do you have a question about the E1200 and is the answer not in the manual?
Questions and answers