Table of Contents
Advertisement
With the unit in Stop mode, press the SETUP button.
1
1
2
2
Use the UP/DOWN buttons to select AUDIO OPTIONS.
Then press the ENTER button.
3
3
Use the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT buttons.
Digital Output
1. PCM : Converts to PCM(2CH) 48kHz/16Bit audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
N N
N N
O O
O O
T T
T T
E E
E E
: Be sure to select the correct Digital Output or
no audio will be heard.
DTS
1. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
2. Off : Doesn't output digital signal.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button.
• Certain audio features of this product manufactured under a license from Desper Products, Inc.
®
Spatializer
and circle-in-square device are trademarks owned by Desper Products, Inc.
• Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights
reserved.
• "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
Setting Up the Audio Options
33
Hide quick links:
Advertisement
Table of Contents
